[arm-allstar] Transmit PL on Simple USB

[Chris]

If you have an older radio that doesn’t do tone get you a TS64 board and it will encode and decode for you.
It just goes in the audio chain. They work great!
Here is a link.
https://www.wiscointl.com/CSpecialists/ctcss.htm

> On Apr 18, 2019, at 11:15 PM, Doug Crompton via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> 
> John,
> 
> No simpleusb does not provide PL tones. What are you using that requires
> it? I suspect an older radio that does not have PL?  For Allstar you really
> need RX PL or tone squelch. Out going PL would be optional but is usually
> always there in radios when you engage incoming PL.
> 
> 
> *73 Doug*
> 
> *WA3DSP*
> 
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> 
> On Thu, Apr 18, 2019 at 11:12 PM "John Griffith via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
>> Hey everyone,
>> Is there a way to provide a CTCSS tone on the transmitted carrier
>> If I'm using the Simple USB channel?
>> 
>> John Griffith
>> N7OKN
>> 
>> _______________________________________________
>> 
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org