[arm-allstar] Supermon issues

[Doug Crompton]

Mike,

 The update would not have effected anything previously setup. Go over the
setup again. Is the allmon.ini file pointing to the correct manager Ip
address? 127.0.0.1 for same server or local IP address of another server on
your LAN or public IP if outside. Correct user/pass and same user/pass in
the manager.conf file? If the manager you are trying to reach is not on the
same server you need to set the bind address at that manager to 0.0.0.0 not
127.0.0.1. If it is outside your LAN you also need to port forward port
5038 and you should firewall it as per the howto at hamvoip.org.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Wed, Apr 10, 2019 at 5:45 PM "Mike Sullivan via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I'm working on setting up Supermon on our node.. been working on getting
> everything set up. I have the page running, been trying to figure out a
> login issue, but can't figure out why. I did an update to be safe (after
> remembering the cosmetic update the other day) and now when I log in, the
> page is giving me "Could not login to Asterisk Manager".. any reason why?
> It was working before I ran the node update.
>
> Mike
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>