[arm-allstar] Whitelist 1 node - Same Server?

[Sean McCarthy]

Working like a charm.

Thanks David!

On Fri, Apr 5, 2019 at 2:26 PM "David McGough via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

>
> Doug,
>
> With my modified extensions script, you just call context=radio-secure
> from iax.conf.
>
>
> 73, David KB4FXC
>
>
> On Fri, 5 Apr 2019, "Doug Crompton via ARM-allstar" wrote:
>
> > I don't think this will work since iax,conf directly calls the white,
> > black, or radio context depending on the users desire. ALL traffic would
> > then go through the one selected. The decision is made before it gets to
> > the extensions file.
> >
> > [radio]
> > type=user
> > disallow=all
> > allow=g726aal2
> > allow=ilbc
> > allow=ulaw
> > ;allow=gsm
> > codecpriority=host
> > ; **** Select one and only one of the next three lines ****
> > ;context=radio-secure
> > context=blacklist
> > ;context=whitelist
> > transfer=no
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> > On Fri, Apr 5, 2019 at 11:04 AM "David McGough via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > >
> > >
> > > Sean,
> > >
> > > Yes, fairly easy to do.  In your extensions.conf file,
> > > you've got a [radio-secure] stanza that looks something like this. Note
> > > that the 23455, 23456 and 23457 are 3 nodes on the same box:
> > >
> > >
> > > [radio-secure]
> > > exten => 23455,1,rpt,23455|X
> > > exten => 23456,1,rpt,23456|X
> > > exten => 23457,1,rpt,23457|X
> > >
> > >
> > > Change this to be something like this, where node 23456 goes through
> the
> > > "whitelist":
> > >
> > > [radio-secure]
> > > exten => 23455,1,rpt,23455|X
> > > exten => 23456,1,Goto(whitelist|s|1)
> > > exten => 23457,1,rpt,23457|X
> > >
> > >
> > > [whitelist]
> > > exten => s,1,NoOp(${CALLERID(num)})
> > > exten => s,n,NoOp(${IAXPEER(CURRENTCHANNEL)})
> > > exten => s,n,GotoIf($["${IAXPEER(CURRENTCHANNEL)}" =
> > > "127.0.0.1"]?radio-secure,${EXTEN},1)  ;permit local IPs
> > > exten =>
> > >
> s,n,GotoIf($[${DB_EXISTS(whitelist/${CALLERID(num)})}]?radio-secure,${EXTEN},1)
> > > exten => s,n,Hangup
> > >
> > >
> > >
> > > I HAVEN'T ACTUALLY TRIED THIS! So, my syntax may not be quite perfect!
> > > I'll try it later today, if someone else doesn't beat me to it....But,
> > > this is the basic idea.
> > >
> > >
> > > 73, David KB4FXC
> > >
> > >
> > >
> > >
> > > On Fri, 5 Apr 2019, "Sean McCarthy via ARM-allstar" wrote:
> > >
> > > > Should have clearly stated, the server has 2 nodes, I would like a
> > > > whitelist on only one of those nodes.
> > > >
> > > > Thanks,
> > > > Sean
> > > >
> > > > On Fri, Apr 5, 2019 at 9:19 AM Sean McCarthy <smccarthy61 at gmail.com>
> > > wrote:
> > > >
> > > > > Is there any way to set up iax.conf and extensions.conf for a
> whitelist
> > > > > that only affects one node on the same server?
> > > > >
> > > > > Thanks,
> > > > > Sean
> > > > >
> > > > _______________________________________________
> > > >
> > > > ARM-allstar mailing list
> > > > ARM-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > >
> > >
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>