[arm-allstar] Whitelist 1 node - Same Server?

[Doug Crompton]

I don't think this will work since iax,conf directly calls the white,
black, or radio context depending on the users desire. ALL traffic would
then go through the one selected. The decision is made before it gets to
the extensions file.

[radio]
type=user
disallow=all
allow=g726aal2
allow=ilbc
allow=ulaw
;allow=gsm
codecpriority=host
; **** Select one and only one of the next three lines ****
;context=radio-secure
context=blacklist
;context=whitelist
transfer=no


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Fri, Apr 5, 2019 at 11:04 AM "David McGough via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

>
>
> Sean,
>
> Yes, fairly easy to do.  In your extensions.conf file,
> you've got a [radio-secure] stanza that looks something like this. Note
> that the 23455, 23456 and 23457 are 3 nodes on the same box:
>
>
> [radio-secure]
> exten => 23455,1,rpt,23455|X
> exten => 23456,1,rpt,23456|X
> exten => 23457,1,rpt,23457|X
>
>
> Change this to be something like this, where node 23456 goes through the
> "whitelist":
>
> [radio-secure]
> exten => 23455,1,rpt,23455|X
> exten => 23456,1,Goto(whitelist|s|1)
> exten => 23457,1,rpt,23457|X
>
>
> [whitelist]
> exten => s,1,NoOp(${CALLERID(num)})
> exten => s,n,NoOp(${IAXPEER(CURRENTCHANNEL)})
> exten => s,n,GotoIf($["${IAXPEER(CURRENTCHANNEL)}" =
> "127.0.0.1"]?radio-secure,${EXTEN},1)  ;permit local IPs
> exten =>
> s,n,GotoIf($[${DB_EXISTS(whitelist/${CALLERID(num)})}]?radio-secure,${EXTEN},1)
> exten => s,n,Hangup
>
>
>
> I HAVEN'T ACTUALLY TRIED THIS! So, my syntax may not be quite perfect!
> I'll try it later today, if someone else doesn't beat me to it....But,
> this is the basic idea.
>
>
> 73, David KB4FXC
>
>
>
>
> On Fri, 5 Apr 2019, "Sean McCarthy via ARM-allstar" wrote:
>
> > Should have clearly stated, the server has 2 nodes, I would like a
> > whitelist on only one of those nodes.
> >
> > Thanks,
> > Sean
> >
> > On Fri, Apr 5, 2019 at 9:19 AM Sean McCarthy <smccarthy61 at gmail.com>
> wrote:
> >
> > > Is there any way to set up iax.conf and extensions.conf for a whitelist
> > > that only affects one node on the same server?
> > >
> > > Thanks,
> > > Sean
> > >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>