[arm-allstar] Supermon configuration
Doug Crompton
wa3dsp at gmail.com
Fri Sep 21 10:13:28 EDT 2018
Giles,
It sounds like port 5038 is not getting from point A to point B. What is
the path? Do you allow that port through? Is there some firewall setup
limiting it? Do other ports (IAX, SSH) work through this same path?
*73 Doug*
*WA3DSP*
*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
On Fri, Sep 21, 2018 at 9:50 AM "ve2gqf--- via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:
> Thank's Paul,
>
> In fact password was not ***, but I had test with other password
> (uppercase, lowercase) pwd, but there is n change !
>
> Another idea ?
>
> Manager.conf has bindport 0.0.0.0 Yes
> Secret set correctly at both allmon.ini and manager.conf Yes
>
> The RPI is on site, and I have access throut a VPN, no FW on the RPI.
>
> Thank's Gilles VE2GQF
>
>
> Le 2018-09-20 à 08:49, "Paul - KN2R via ARM-allstar" a écrit :
> > Maybe it does not like the characters with asterisk "*" in password.
> Change those and see if it works.
> >
> > Paul / KN2R
> >
> >
> >
> > -----Original Message-----
> > From: ARM-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> "Doug Crompton via ARM-allstar"
> > Sent: Wednesday, September 19, 2018 11:01 AM
> > To: ARM Allstar
> > Cc: Doug Crompton
> > Subject: Re: [arm-allstar] Supermon configuration
> >
> > Giles,
> >
> > I am not sure what could be wrong. This does work. Did you follow all
> the directions in the howto at hamvoip.org?
> >
> > Manager.conf has bindport 0.0.0.0
> > Secret set correctly at both allmon.ini and manager.conf
> >
> > What is the path for this control? Is it within your LAN or out on the
> Internet?
> > If out on the Internet you need to port forward 5038 TCP.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> >
> >
> >
> > On Wed, Sep 19, 2018 at 10:48 AM "ve2gqf--- via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
> >
> >> Thank you very much Doug for your response,
> >>
> >> I have made these corrections, without success.
> >>
> >> If it can helps :
> >>
> >> [root at VE2RQF-900 asterisk]# tcpdump port 5038
> >> tcpdump: verbose output suppressed, use -v or -vv for full protocol
> >> decode listening on eth0, link-type EN10MB (Ethernet), capture size
> >> 262144 bytes
> >> 06:55:42.260508 IP VE2RQF-900.51582 > 192.168.27.134.5038: Flags [S],
> >> seq 4033407941, win 29200, options [mss 1460,sackOK,TS val 3964593032
> >> ecr 0,nop,wscale 7], length 0
> >> 06:55:43.265404 IP VE2RQF-900.51582 > 192.168.27.134.5038: Flags [S],
> >> seq 4033407941, win 29200, options [mss 1460,sackOK,TS val 3964594037
> >> ecr 0,nop,wscale 7], length 0
> >> 06:55:45.345406 IP VE2RQF-900.51582 > 192.168.27.134.5038: Flags [S],
> >> seq 4033407941, win 29200, options [mss 1460,sackOK,TS val 3964596117
> >> ecr 0,nop,wscale 7], length 0
> >> 06:56:38.029448 IP VE2RQF-900.51600 > 192.168.27.134.5038: Flags [S],
> >> seq 2964414919, win 29200, options [mss 1460,sackOK,TS val 3964648802
> >> ecr 0,nop,wscale 7], length 0
> >> 06:56:39.115401 IP VE2RQF-900.51600 > 192.168.27.134.5038: Flags [S],
> >> seq 2964414919, win 29200, options [mss 1460,sackOK,TS val 3964649888
> >> ecr 0,nop,wscale 7], length 0
> >>
> >> Another suggestion ?
> >>
> >> 73's Gilles VE2GQF
> >>
> >>
> >> Le 2018-09-18 à 23:21, "Doug Crompton via ARM-allstar" a écrit :
> >>> Giles,
> >>>
> >>> It seems you changed a few lines in manager.conf that did not need
> >>> to be changed and did not change the one line you needed to change!
> >>> Here is
> >> what
> >>> it should look like -
> >>>
> >>> *manager.conf*
> >>> [general]
> >>> displaysystemname = yes
> >>> enabled = yes
> >>> ;webenabled = yes
> >>> port = *5038*
> >>>
> >>> ;httptimeout = 60
> >>> ; a) httptimeout sets the Max-Age of the http cookie ; b)
> >>> httptimeout is the amount of time the webserver waits
> >>> ; on a action=waitevent request (actually its httptimeout-10)
> >>> ; c) httptimeout is also the amount of time the webserver keeps
> >>> ; a http session alive after completing a successful action
> >>>
> >>> ;bindaddr = 127.0.0.1 ; Local interface only!
> >>> bindaddr = 0.0.0.0 ; Not secure
> >>> ;
> >>> ;displayconnects = yes
> >>> ;
> >>> ; Add a Unix epoch timestamp to events (not action responses) ;
> >>> ;timestampevents = yes
> >>>
> >>> [admin]
> >>> secret = *xxxx*
> >>> read = all,system,call,log,verbose,command,agent,user,config
> >>> write = all,system,call,log,verbose,command,agent,user,config
> >>>
> >>> Note - webenabled is commented, disolayconnects is commented and
> >>> most importantly
> >>> bindaddr=0.0.0.0 is uncommented and bindaddr=127.0.0.1 is commented
> >>> without this bindaddr change the manager cannot be accessed outside
> >>> of
> >> this
> >>> server.
> >>> Also note that if you port forward the manager port you could open
> >> yourself
> >>> up to
> >>> security problems. See the supermon howto at hamvoip.org for a
> >>> firewall script to avoid that.
> >>>
> >>>
> >>> *73 Doug*
> >>>
> >>> *WA3DSP*
> >>>
> >>> *http://www.crompton.com/hamradio
> >>> <http://www.crompton.com/hamradio>*
> >>>
> >>> On Tue, Sep 18, 2018 at 9:23 PM "ve2gqf--- via ARM-allstar" <
> >>> arm-allstar at hamvoip.org> wrote:
> >>>
> >>>> Hi Doug,
> >>>>
> >>>> I trying to run supermon on VE2RQF all looks good but I have an issue.
> >>>> Supermon can't connect to Asterisk Manager. there is no firewall,
> >>>> no
> >> port
> >>>> blocked.
> >>>>
> >>>> [ VE2RQF-900 ] [ WAN IP: 70.82.65.122 <
> >>>> http://192.168.27.66/supermon/custom/iplog.txt> ] [ LAN IP:
> >> 192.168.2.153
> >>>> ] [ AstP: 4569 ] [ MgrP: 5038 ] [
> >>>> SShP: 222 ]
> >>>> [ Tuesday, September 18, 2018 EDT 19:16:05 up 2 days, 2:00, 5
> >>>> users,
> >> load
> >>>> average: 0.06, 0.09, 0.09 ]
> >>>>
> >>>> / Node 47646 <http://stats.allstarlink.org/nodeinfo.cgi?node=47646>
> =>
> >>>> VE2RQF 927.300- Sherbrooke, Quebec Bubble Chart
> >>>> <http://stats.allstarlink.org/getstatus.cgi?47646> lsNodes <
> >>>> http://192.168.27.66/cgi-bin/lsnodes_web?node=47646> /
> >>>> Node Node Information Received Link Direction
> >>>> Connected Mode
> >>>> Connecting to Asterisk Manager...
> >>>>
> >>>>
> >>>> my config files are below
> >>>>
> >>>> allmon.ini
> >>>> [47646]
> >>>> host=127.0.0.1:*5038*
> >>>> user=admin
> >>>> passwd=*xxxx*
> >>>> menu=yes
> >>>> hideNodeURL=no
> >>>>
> >>>> *manager.conf*
> >>>> [general]
> >>>> displaysystemname = yes
> >>>> enabled = yes
> >>>> webenabled = yes
> >>>> port = *5038*
> >>>>
> >>>> ;httptimeout = 60
> >>>> ; a) httptimeout sets the Max-Age of the http cookie ; b)
> >>>> httptimeout is the amount of time the webserver waits
> >>>> ; on a action=waitevent request (actually its httptimeout-10)
> >>>> ; c) httptimeout is also the amount of time the webserver keeps
> >>>> ; a http session alive after completing a successful action
> >>>>
> >>>> bindaddr = 127.0.0.1 ; Local interface only!
> >>>> ;bindaddr = 0.0.0.0 ; Not secure
> >>>> ;
> >>>> displayconnects = yes
> >>>> ;
> >>>> ; Add a Unix epoch timestamp to events (not action responses) ;
> >>>> ;timestampevents = yes
> >>>>
> >>>> [admin]
> >>>> secret = *xxxx*
> >>>> read = all,system,call,log,verbose,command,agent,user,config
> >>>> write = all,system,call,log,verbose,command,agent,user,config
> >>>>
> >>>> Can you say what I have missed ?
> >>>>
> >>>> Thank's,
> >>>>
> >>>> Gilles ve2gqf
> >>>>
> >>>>
> >>>>
> >>>> ---
> >>>> L'absence de virus dans ce courrier électronique a été vérifiée par
> >>>> le logiciel antivirus Avast.
> >>>> https://www.avast.com/antivirus
> >>>> _______________________________________________
> >>>>
> >>>> ARM-allstar mailing list
> >>>> ARM-allstar at hamvoip.org
> >>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>
> >>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>> _______________________________________________
> >>>
> >>> ARM-allstar mailing list
> >>> ARM-allstar at hamvoip.org
> >>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>
> >>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>
> >> ---
> >> L'absence de virus dans ce courrier électronique a été vérifiée par le
> >> logiciel antivirus Avast.
> >> https://www.avast.com/antivirus
> >>
> >> _______________________________________________
> >>
> >> ARM-allstar mailing list
> >> ARM-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>
> ---
> L'absence de virus dans ce courrier électronique a été vérifiée par le
> logiciel antivirus Avast.
> https://www.avast.com/antivirus
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
More information about the ARM-allstar
mailing list