[arm-allstar] Supermon configuration

Paul - KN2R paulkn2r at gmail.com
Thu Sep 20 08:49:08 EDT 2018 

Maybe it does not like the characters with asterisk "*" in password.  Change those and see if it works.

Paul / KN2R



-----Original Message-----
From: ARM-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of "Doug Crompton via ARM-allstar"
Sent: Wednesday, September 19, 2018 11:01 AM
To: ARM Allstar
Cc: Doug Crompton
Subject: Re: [arm-allstar] Supermon configuration

Giles,

 I am not sure what could be wrong. This does work. Did you follow all the directions in the howto at hamvoip.org?

Manager.conf   has bindport  0.0.0.0
Secret set correctly at both allmon.ini and manager.conf

What is the path for this control? Is it within your LAN or out on the Internet?
If out on the Internet you need to port forward 5038 TCP.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*




On Wed, Sep 19, 2018 at 10:48 AM "ve2gqf--- via ARM-allstar" < arm-allstar at hamvoip.org> wrote:

> Thank you very much Doug for your response,
>
> I have made these corrections, without success.
>
> If it can helps :
>
> [root at VE2RQF-900 asterisk]# tcpdump port 5038
> tcpdump: verbose output suppressed, use -v or -vv for full protocol 
> decode listening on eth0, link-type EN10MB (Ethernet), capture size 
> 262144 bytes
> 06:55:42.260508 IP VE2RQF-900.51582 > 192.168.27.134.5038: Flags [S], 
> seq 4033407941, win 29200, options [mss 1460,sackOK,TS val 3964593032 
> ecr 0,nop,wscale 7], length  0
> 06:55:43.265404 IP VE2RQF-900.51582 > 192.168.27.134.5038: Flags [S], 
> seq 4033407941, win 29200, options [mss 1460,sackOK,TS val 3964594037 
> ecr 0,nop,wscale 7], length  0
> 06:55:45.345406 IP VE2RQF-900.51582 > 192.168.27.134.5038: Flags [S], 
> seq 4033407941, win 29200, options [mss 1460,sackOK,TS val 3964596117 
> ecr 0,nop,wscale 7], length  0
> 06:56:38.029448 IP VE2RQF-900.51600 > 192.168.27.134.5038: Flags [S], 
> seq 2964414919, win 29200, options [mss 1460,sackOK,TS val 3964648802 
> ecr 0,nop,wscale 7], length  0
> 06:56:39.115401 IP VE2RQF-900.51600 > 192.168.27.134.5038: Flags [S], 
> seq 2964414919, win 29200, options [mss 1460,sackOK,TS val 3964649888 
> ecr 0,nop,wscale 7], length  0
>
> Another suggestion ?
>
> 73's Gilles VE2GQF
>
>
> Le 2018-09-18 à 23:21, "Doug Crompton via ARM-allstar" a écrit :
> > Giles,
> >
> >  It seems you changed a few lines in manager.conf that did not need 
> > to be changed and did not change the one line you needed to change!  
> > Here is
> what
> > it should look like -
> >
> > *manager.conf*
> > [general]
> > displaysystemname = yes
> > enabled = yes
> > ;webenabled = yes
> > port = *5038*
> >
> > ;httptimeout = 60
> > ; a) httptimeout sets the Max-Age of the http cookie ; b) 
> > httptimeout is the amount of time the webserver waits
> > ;    on a action=waitevent request (actually its httptimeout-10)
> > ; c) httptimeout is also the amount of time the webserver keeps
> > ;    a http session alive after completing a successful action
> >
> > ;bindaddr = 127.0.0.1   ; Local interface only!
> > bindaddr = 0.0.0.0    ; Not secure
> > ;
> > ;displayconnects = yes
> > ;
> > ; Add a Unix epoch timestamp to events (not action responses) ; 
> > ;timestampevents = yes
> >
> > [admin]
> > secret = *xxxx*
> > read = all,system,call,log,verbose,command,agent,user,config
> > write = all,system,call,log,verbose,command,agent,user,config
> >
> > Note - webenabled is commented, disolayconnects is commented and 
> > most importantly
> > bindaddr=0.0.0.0  is uncommented and bindaddr=127.0.0.1 is commented 
> > without this bindaddr change the manager cannot be accessed outside 
> > of
> this
> > server.
> > Also note that if you port forward the manager port you could open
> yourself
> > up to
> > security problems. See the supermon howto at hamvoip.org for a 
> > firewall script to avoid that.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio 
> > <http://www.crompton.com/hamradio>*
> >
> > On Tue, Sep 18, 2018 at 9:23 PM "ve2gqf--- via ARM-allstar" < 
> > arm-allstar at hamvoip.org> wrote:
> >
> >> Hi Doug,
> >>
> >> I trying to run supermon on VE2RQF all looks good but I have an issue.
> >> Supermon can't connect to Asterisk Manager.  there is no firewall, 
> >> no
> port
> >> blocked.
> >>
> >> [ VE2RQF-900 ] [ WAN IP: 70.82.65.122 < 
> >> http://192.168.27.66/supermon/custom/iplog.txt> ] [ LAN IP:
> 192.168.2.153
> >> ] [ AstP: 4569 ] [ MgrP: 5038 ] [
> >> SShP: 222 ]
> >> [ Tuesday, September 18, 2018 EDT 19:16:05 up 2 days, 2:00, 5 
> >> users,
> load
> >> average: 0.06, 0.09, 0.09 ]
> >>
> >> /  Node 47646 <http://stats.allstarlink.org/nodeinfo.cgi?node=47646> =>
> >> VE2RQF 927.300- Sherbrooke, Quebec    Bubble Chart
> >> <http://stats.allstarlink.org/getstatus.cgi?47646>  lsNodes < 
> >> http://192.168.27.66/cgi-bin/lsnodes_web?node=47646>  /
> >> Node    Node Information        Received        Link    Direction
> >>  Connected       Mode
> >> Connecting to Asterisk Manager...
> >>
> >>
> >> my config files are below
> >>
> >> allmon.ini
> >> [47646]
> >> host=127.0.0.1:*5038*
> >> user=admin
> >> passwd=*xxxx*
> >> menu=yes
> >> hideNodeURL=no
> >>
> >> *manager.conf*
> >> [general]
> >> displaysystemname = yes
> >> enabled = yes
> >> webenabled = yes
> >> port = *5038*
> >>
> >> ;httptimeout = 60
> >> ; a) httptimeout sets the Max-Age of the http cookie ; b) 
> >> httptimeout is the amount of time the webserver waits
> >> ;    on a action=waitevent request (actually its httptimeout-10)
> >> ; c) httptimeout is also the amount of time the webserver keeps
> >> ;    a http session alive after completing a successful action
> >>
> >> bindaddr = 127.0.0.1   ; Local interface only!
> >> ;bindaddr = 0.0.0.0    ; Not secure
> >> ;
> >> displayconnects = yes
> >> ;
> >> ; Add a Unix epoch timestamp to events (not action responses) ; 
> >> ;timestampevents = yes
> >>
> >> [admin]
> >> secret = *xxxx*
> >> read = all,system,call,log,verbose,command,agent,user,config
> >> write = all,system,call,log,verbose,command,agent,user,config
> >>
> >> Can you say what I have missed ?
> >>
> >> Thank's,
> >>
> >> Gilles ve2gqf
> >>
> >>
> >>
> >> ---
> >> L'absence de virus dans ce courrier électronique a été vérifiée par 
> >> le logiciel antivirus Avast.
> >> https://www.avast.com/antivirus
> >> _______________________________________________
> >>
> >> ARM-allstar mailing list
> >> ARM-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>
> ---
> L'absence de virus dans ce courrier électronique a été vérifiée par le 
> logiciel antivirus Avast.
> https://www.avast.com/antivirus
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org

More information about the ARM-allstar mailing list