[arm-allstar] Supermon configuration

Wed Sep 19 07:11:10 EDT 2018

Thank you very much Doug for your response,

I have made these corrections, without success.

If it can helps :

[root at VE2RQF-900 asterisk]# tcpdump port 5038
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes
06:55:42.260508 IP VE2RQF-900.51582 > 192.168.27.134.5038: Flags [S], seq 4033407941, win 29200, options [mss 1460,sackOK,TS val 3964593032 ecr
0,nop,wscale 7], length  0
06:55:43.265404 IP VE2RQF-900.51582 > 192.168.27.134.5038: Flags [S], seq 4033407941, win 29200, options [mss 1460,sackOK,TS val 3964594037 ecr
0,nop,wscale 7], length  0
06:55:45.345406 IP VE2RQF-900.51582 > 192.168.27.134.5038: Flags [S], seq 4033407941, win 29200, options [mss 1460,sackOK,TS val 3964596117 ecr
0,nop,wscale 7], length  0
06:56:38.029448 IP VE2RQF-900.51600 > 192.168.27.134.5038: Flags [S], seq 2964414919, win 29200, options [mss 1460,sackOK,TS val 3964648802 ecr
0,nop,wscale 7], length  0
06:56:39.115401 IP VE2RQF-900.51600 > 192.168.27.134.5038: Flags [S], seq 2964414919, win 29200, options [mss 1460,sackOK,TS val 3964649888 ecr
0,nop,wscale 7], length  0

Another suggestion ?

73's Gilles VE2GQF

Le 2018-09-18 à 23:21, "Doug Crompton via ARM-allstar" a écrit :
> Giles,
>
>  It seems you changed a few lines in manager.conf that did not need to be
> changed and did not change the one line you needed to change!  Here is what
> it should look like -
>
> *manager.conf*
> [general]
> displaysystemname = yes
> enabled = yes
> ;webenabled = yes
> port = *5038*
>
> ;httptimeout = 60
> ; a) httptimeout sets the Max-Age of the http cookie
> ; b) httptimeout is the amount of time the webserver waits
> ;    on a action=waitevent request (actually its httptimeout-10)
> ; c) httptimeout is also the amount of time the webserver keeps
> ;    a http session alive after completing a successful action
>
> ;bindaddr = 127.0.0.1   ; Local interface only!
> bindaddr = 0.0.0.0    ; Not secure
> ;
> ;displayconnects = yes
> ;
> ; Add a Unix epoch timestamp to events (not action responses)
> ;
> ;timestampevents = yes
>
> [admin]
> secret = *xxxx*
> read = all,system,call,log,verbose,command,agent,user,config
> write = all,system,call,log,verbose,command,agent,user,config
>
> Note - webenabled is commented, disolayconnects is commented and most
> importantly
> bindaddr=0.0.0.0  is uncommented and bindaddr=127.0.0.1 is commented
> without this bindaddr change the manager cannot be accessed outside of this
> server.
> Also note that if you port forward the manager port you could open yourself
> up to
> security problems. See the supermon howto at hamvoip.org for a firewall
> script
> to avoid that.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Tue, Sep 18, 2018 at 9:23 PM "ve2gqf--- via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> Hi Doug,
>>
>> I trying to run supermon on VE2RQF all looks good but I have an issue.
>> Supermon can't connect to Asterisk Manager.  there is no firewall, no port
>> blocked.
>>
>> [ VE2RQF-900 ] [ WAN IP: 70.82.65.122 <
>> http://192.168.27.66/supermon/custom/iplog.txt> ] [ LAN IP: 192.168.2.153
>> ] [ AstP: 4569 ] [ MgrP: 5038 ] [
>> SShP: 222 ]
>> [ Tuesday, September 18, 2018 EDT 19:16:05 up 2 days, 2:00, 5 users, load
>> average: 0.06, 0.09, 0.09 ]
>>
>> /  Node 47646 <http://stats.allstarlink.org/nodeinfo.cgi?node=47646> =>
>> VE2RQF 927.300- Sherbrooke, Quebec    Bubble Chart
>> <http://stats.allstarlink.org/getstatus.cgi?47646>  lsNodes <
>> http://192.168.27.66/cgi-bin/lsnodes_web?node=47646>  /
>> Node    Node Information        Received        Link    Direction
>>  Connected       Mode
>> Connecting to Asterisk Manager...
>>
>>
>> my config files are below
>>
>> allmon.ini
>> [47646]
>> host=127.0.0.1:*5038*
>> user=admin
>> passwd=*xxxx*
>> menu=yes
>> hideNodeURL=no
>>
>> *manager.conf*
>> [general]
>> displaysystemname = yes
>> enabled = yes
>> webenabled = yes
>> port = *5038*
>>
>> ;httptimeout = 60
>> ; a) httptimeout sets the Max-Age of the http cookie
>> ; b) httptimeout is the amount of time the webserver waits
>> ;    on a action=waitevent request (actually its httptimeout-10)
>> ; c) httptimeout is also the amount of time the webserver keeps
>> ;    a http session alive after completing a successful action
>>
>> bindaddr = 127.0.0.1   ; Local interface only!
>> ;bindaddr = 0.0.0.0    ; Not secure
>> ;
>> displayconnects = yes
>> ;
>> ; Add a Unix epoch timestamp to events (not action responses)
>> ;
>> ;timestampevents = yes
>>
>> [admin]
>> secret = *xxxx*
>> read = all,system,call,log,verbose,command,agent,user,config
>> write = all,system,call,log,verbose,command,agent,user,config
>>
>> Can you say what I have missed ?
>>
>> Thank's,
>>
>> Gilles ve2gqf
>>
>>
>>
>> ---
>> L'absence de virus dans ce courrier électronique a été vérifiée par le
>> logiciel antivirus Avast.
>> https://www.avast.com/antivirus
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org

---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
https://www.avast.com/antivirus