[arm-allstar] PC build

Tue Sep 18 15:16:18 EDT 2018

Doug,

As you know with my limited internet service I'm unable to port forward. I
have been looking for other ways to get around this. I drive many miles
with no cell service at all and often find people stranded on the road.
This is the reason I have been building repeaters and node connections on
different bands to see if I can fill the communication gap. Now that I have
done that I wanted to be able to contact my wife so that she could call for
help. I wanted to be able to connect to her node as needed. I also want to
have her connect to what ever node I was on when I'm driving to and from
work. That lead me to using a virtual server to have nodes that will port
forward. Unfortunately its a pc and I have to use other software. I really
don't like it and would rather use hamvoip.Thanks

Chris Viningre
70 W. Roadrunner
Salt Flat, Texas 79847
C:(915) 504-1510
chrisviningre at gmail.com

On Tue, Sep 18, 2018 at 8:44 AM "Doug Crompton via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Chris,
>
>  Not as far as I know. Why are you using a PC? There seems to be a lot of
> interest in running Allstar on a PC but I am not sure why anyone would want
> to run a PC unless they had to. There seems to be this misconception of
> some that the Pi is not as capable and reliable as it really is. We have 50
> or more direct nodes running on Pi's and they don't skip a beat. Of course
> if you have bad Internet and need to run it at a data center then you have
> no choice.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Tue, Sep 18, 2018 at 5:02 AM "Chris Viningre via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > I would love to but will it work on a PC running dail? I didn't see a way
> > to download it.
> >
> > On Mon, Sep 17, 2018, 9:13 PM "Doug Crompton via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Chris,
> > >
> > >  You really should setup supermon. It has so many more features.
> > >
> > >
> > > *73 Doug*
> > >
> > > *WA3DSP*
> > >
> > > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> > >
> > > On Mon, Sep 17, 2018 at 9:28 PM "Chris Viningre via ARM-allstar" <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > > Andy I'm doing the same thing. I'll be much happier with hamvoip. I'm
> > > > having a problem with setting up Allmon2. Would you mind contacting
> me
> > > off
> > > > the list so I might pick your brain?
> > > >
> > > > Chris WS5B
> > > > chrisviningre at gmail.com
> > > > ws5b at yahoo.com
> > > >
> > > >
> > > > On Mon, Sep 17, 2018, 4:10 PM "NV6V via ARM-allstar" <
> > > > arm-allstar at hamvoip.org> wrote:
> > > >
> > > > > I've got an ASL image on a Vultr server.  It's sure a lot different
> > > from
> > > > > hamvoip!  I have the node working and AllmonII sort of running.
> I'd
> > > > > sure like to start over with hamvoip...
> > > > >
> > > > > Anyway, thanks to the team for all your hard work, and I understand
> > the
> > > > > priorities.
> > > > >
> > > > > 73!
> > > > >
> > > > > ---
> > > > > Andy Thomas, NV6V
> > > > >
> > > > >
> > > > > On 2018-09-17 13:54, "James R. Pilgram via ARM-allstar" wrote:
> > > > > > I was about to type the same question.  I want to set my hub up
> on
> > a
> > > > > > digital ocean server.
> > > > > > Jim NH6HI
> > > > > >
> > > > > >
> > > > > >   Original Message
> > > > > > From: arm-allstar at hamvoip.org
> > > > > > Sent: September 17, 2018 10:50
> > > > > > To: arm-allstar at hamvoip.org
> > > > > > Reply-to: arm-allstar at hamvoip.org
> > > > > > Cc: john at qso.com
> > > > > > Subject: [arm-allstar] PC build
> > > > > >
> > > > > > Greetings!
> > > > > >
> > > > > > Just wondering if we're close to a HamVoip PC build?
> > > > > > Would like to play with it.
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > >
> > > > > > ARM-allstar mailing list
> > > > > > ARM-allstar at hamvoip.org
> > > > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > > >
> > > > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > > > > _______________________________________________
> > > > > >
> > > > > > ARM-allstar mailing list
> > > > > > ARM-allstar at hamvoip.org
> > > > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > > >
> > > > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > > > _______________________________________________
> > > > >
> > > > > ARM-allstar mailing list
> > > > > ARM-allstar at hamvoip.org
> > > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > >
> > > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > > _______________________________________________
> > > >
> > > > ARM-allstar mailing list
> > > > ARM-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > >
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>