[arm-allstar] Echolink Connect announcements

[Mike Besemer]

Bueller?  Bueller?  Bueller?  


Mike
WM4B

-----Original Message-----
From: ARM-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"Mike Besemer via ARM-allstar"
Sent: Thursday, September 6, 2018 3:56 PM
To: 'ARM Allstar'
Cc: Mike Besemer; 'Doug Crompton'
Subject: Re: [arm-allstar] Echolink Connect announcements

Doug,

I replied, but I don't think it made it on the list.

Yes... SimpleUSB with an RA-42.  TXCTCSS control works via GPIO8 find with
this setup; TXCTCSS discrete follows COS, but it does not allow TXCTCSS on
announcements.

Thoughts?

Mike
WM4B

-----Original Message-----
From: ARM-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"Doug Crompton via ARM-allstar"
Sent: Tuesday, September 4, 2018 4:03 PM
To: ARM Allstar
Cc: Doug Crompton
Subject: Re: [arm-allstar] Echolink Connect announcements

>
> Mike,
>
>   Are you using simpleusb?  Any transmission should have PL as all
> simpleusb does is key the PTT. The TX supplies PL on every transmission.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Tue, Sep 4, 2018 at 3:40 PM Mike Besemer <mwbesemer at cox.net> wrote:
>
>> Doug,
>>
>> Didn't notice this yesterday because I was monitoring my RF node on my
>> HT, but when the connect messages ARE being sent, they are sent without
PL
>> being encode.  That definitely limits the usefulness of the connect
message
>> as well.
>>
>> 73,
>>
>> Mike
>> WM4B
>>
>>
>>
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org

_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org