[arm-allstar] 2 nodes
wa3dsp at gmail.com
Thu Sep 6 14:36:27 EDT 2018
If these servers are on the same LAN see the howto on this at hamvoip.org -
Make sure you specify the port in the addressing at BOTH ends.
On Thu, Sep 6, 2018 at 1:17 PM "Glenn via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:
> "Doug Crompton via ARM-allstar" wrote:
> > As Bryan pointed out it is rather easy to manage multiple nodes from one
> > supermon instance. I manage 13 servers in one supermon instance here.
> > Decide what server you want to run supermon on and configure the
> > file to point to the various other servers you want to manage.
> > The host address to monitor nodes on the server supermon is running on
> > would be 127.0.0.1:5038 and for other servers it would be the IP
> > to them, local or remote. If it was strictly local system (within your
> > you would not need to do port forwarding. You would however need to set
> > manager.conf bindaddress to 0.0.0.0 at each server commenting out the
> > 127.0.0.1 address.
> > If you are managing outside of your LAN systems you would need to port
> > forward and also add a firewall setting. This is all described in the
> > You can then port forward the http port for the server supermon is
> > on and monitor and control the setup servers from anywhere. Probably best
> > to move the http port off of port 80.
> > Supermon is an incredibly powerful tool to manage your Allstar nodes.
> > fun.
> > *73 Doug*
> > *WA3DSP*
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> > On Wed, Sep 5, 2018 at 3:03 PM "Bryan St Clair via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> Thanks guys, I am about half done..........
> Have supermon running on node X
> can excess both nodes X and Y from supermon running on X
> connecting node X to node Y is a no connect
> connecting node Y to node X is a good connect
> manager on X and Y bind address 0.0.0.0
> any thoughts please
> Glenn k5cod
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
More information about the arm-allstar