[arm-allstar] New: "NO-CID" reported for IaxRpt and/or Zoiper nodes

[David McGough]

Hi Vendel,


A node showing up as (or announcing as) "NO-CID" is a new HamVoIP feature
as of the latest release (V1.5.3-42 09/01/2018). This is a bug-fix
---previously, an invalid node identifier was getting stuffed into the
node list. Oops!

The "NO-CID" node ID will come from IaxRpt or Zoiper connections which
aren't fully configured.  To remove the "NO-CID" ID and replace with a
correct value, check two config areas.

First, make certain the IaxRpt or Zoiper "CallerID" account field is set
to the desired node name. For example, I have mine set to: KB4FXC-IAXRPT

Second, make certain that the CallerID name field is passed to app_rpt
correctly in the /etc/asterisk/extensions.conf file. This is done via the
LAST line of the incoming node stanza for IaxRpt or Zoiper. For example:


exten => 2345,n,Rpt,2345|Pv|${CALLERID(name)}


...Make sure to replace the 2345 with your actual node number.

73, David KB4FXC





Date: Tue, 04 Sep 2018 08:11:00 -0400
From: Vendel Boeree <hot96xl at yahoo.com>
To: arm-allstar at hamvoip.org
Subject: Node no-cid?


Hello all. I did an update last night and it seems all is ok. This morning 
I checked connections with *70 via IAXRPT and the response was my node and 
"node no-cid". What's that all about?