[arm-allstar] Echolink Connect announcements

[Mike Besemer]

No... I have Echolink running on a node that is attached to an RF link to my
repeater (Duplex=1) and I'm not hearing that announcement on the repeater.

Mike
WM4B
-----Original Message-----
From: ARM-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"Doug Crompton via ARM-allstar"
Sent: Saturday, September 1, 2018 5:24 PM
To: ARM Allstar
Cc: Doug Crompton
Subject: Re: [arm-allstar] Echolink Connect announcements

Mike,

  Echolink like Allstar will only announce on the RF link it is connected
to. It is localplay like other messages. If you have Echolink on a node by
itself without a radio you will not hear it. That is the one downside of
having Echolink on a separate node. It that your scenario?


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Sat, Sep 1, 2018 at 5:08 PM "Mike Besemer via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Is anyone else not hearing Echolink Connect announcements?  I has eannmode
> in rpt.conf set to 1 and was hearing nothing.  Just reset it to eannmode=2
> and did an ASTModule/RPT Reload via SuperMon and still don't hear any
> connection announcements.
>
> Mike
> WM4B
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org