[arm-allstar] Connecting to node 29332

[Gerry Filby]

Yes, port 4559 was set during the first run script and hasn't been 
changed since.  Here's the top of my /etc/asterisk/iax.conf

g

; WARNING - THIS FILE WAS AUTOMATICALLY CONFIGURED FROM A
; TEMPLATE FILE IN   /usr/local/etc/asterisk_tpl   BY THE
; NODE-CONFIG.SH SCRIPT.
;
; EACH TIME THIS SCRIPT IS RUN, THIS FILE WILL BE OVERWRITTEN.
; IF YOU CHANGE ANYTHING IN THIS FILE AND RUN THE NODE-CONFIG.SH
; SCRIPT, IT WILL BE LOST.
;
; IF YOU INTEND TO USE THE NODE-CONFIG.SH SCRIPT,  THEN YOU SHOULD
; MAKE MODIFICATIONS TO THE ACTUAL TEMPLATE FILES LOCATED IN
; /usr/local/etc/asterisk_tpl directory.
;
; Inter-Asterisk eXchange driver definition
;
; Edit the registration lines below and also passwords for various
; connections.
; : iax.conf_tpl 25 2015-03-19 03:20:38Z w0anm $

[general]
bindport=4559
bindaddr=0.0.0.0
disallow=all
allow=g726aal2
allow=ilbc
allow=ulaw
allow=gsm
jitterbuffer=yes
forcejitterbuffer=yes
dropcount=2
maxjitterbuffer=4000
maxjitterinterps=10
resyncthreshold=1000
maxexcessbuffer=80
minexcessbuffer=10
jittershrinkrate=1
tos=0x1E
autokill=yes
delayreject=yes
;iaxthreadcount=30
;

Gerry,

  This is very strange. Are you sure you have your iax.conf bindport set the
same as is being reported?

dns-query 49111
+OK|radio at 198.27.190.130:4559/49111,198.27.190.130

Port 4559 ???


*73 Doug*

*WA3DSP*