[arm-allstar] Misbehaving Node

[Doug Crompton]

David,

 Updating to V1.5 is a good thing to do for more reasons than one.
Hopefully everyone is considering updating their older nodes to a Pi and
V1.5 and get the benefit of all the new software and online updates.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Tue, Oct 2, 2018 at 6:03 PM David <david at kg5rdf.com> wrote:

> Doug, thanks for the reply. I found out some more information. Its node
> 46034 and node 48392 that hate each other:) I verified bindport on all my
> nodes, router, and on Allstarlink.org. They are different images. Have no
> issues with my bridges intermix. I will just make 48392 1.5 image and move
> on.
>
> Thanks again for your responce.
>
> -------- Original message --------
> From: Doug Crompton via ARM-allstar <arm-allstar at hamvoip.org>
> Date: 10/2/18 11:27 AM (GMT-06:00)
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Cc: Doug Crompton <wa3dsp at gmail.com>
> Subject: Re: [arm-allstar] Misbehaving Node
>
> David,
>
> I presume you have rebooted and have the same results. Are you seeing any
> log messages that would be instructive? Anything showing in the client when
> you connect?
>
> After two years it certainly would not hurt to put in a new SD card
> although there is no real time limit on the card the way we use it.
>
> Is this at a place where it is hard to get to? If not I would just do a
> backup using file-backup.sh and copy the backup using scp to another system
> and put V1.5 on a new SD, update it and do the setup and then copy over the
> files you have changed from the backup.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
>
>
> On Tue, Oct 2, 2018 at 11:50 AM "David via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> >
> > I have a node x that when it is instructed to connect: connects, does not
> > send telemetry, hangs ppt on node x, shows connected, is not hanging ppt
> on
> > system connected to, when instructed to disconnect both the original
> > connect and disconnect telemetry play and ptt drops.
> > Can I force a reload of the software by downloading 1.5 and then
> upgrading
> > again? Or is the sd card going to revert after boot? Or can I load
> > everything from the sd card and see if it's good?
> > This node has been in operation for 2 years.  Looking to see if there is
> > an alternative to making a new image.
> > Thanks David
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>