[arm-allstar] ASL <-> Hamvoip disconnects

[Doug Crompton]

Yes, the node you are connecting to has remote base activated.

 dns-query 46875
+OK|radio at 66.149.142.47:4569/46875,66.149.142.47,y

indicated by the y at the end of the line.  Deactivate remote base which in
most all cases is a mistake at allstarlink.org and it should work.

This is also a reminder that very soon remote base code will be removed
from the hamvoip distribution.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Tue, Nov 27, 2018 at 10:37 PM "Steve via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I have an ASL install on a VPS and when I connect from it to one of my
> Hamvoip nodes, I get a disconnect after 45 seconds. These messages are in
> the cli on the Hamvoip system after it occurs.
>
>   -- Executing [46875 at radio-secure:1] Rpt("IAX2/144.202.31.51:4569-8924",
> "46875") in new stack
> == Spawn extension (radio-secure, 46875, 1) exited KEEPALIVE on
> 'IAX2/144.202.31.51:4569-8924'
> [Nov 24 12:19:25] ERROR[1058]: app_rpt.c:18665 rpt: No link messages from
> [46971] in 46 seconds -- One way audio??? Forcing reconnect.
> -- Hungup 'IAX2/144.202.31.51:4569-8924'
> -- Hungup 'DAHDI/pseudo-432137072'
>
> If I connect from the Hamvoip system to the ASL system, I don’t get this,
> the system stays connected as expected.
>
> Any idea what might be causing this?
>
> Thanks,
> Steve – WB4BXO
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org