[arm-allstar] Feature request

[Justin Reed]

Thanks Doug, I copied the original over to /etc/asterisk/local. I didn't 
see an updated script attached to your email.
This gives me something to start with.
73,
Justin


On 11/16/2018 1:42 AM, "Doug Crompton via ARM-allstar" wrote:
> I actually modified the script again after thinking it. I am attaching a
> better updated script. This should work fine. Assuming you are using a
> DMK-URI or other FOB where you can pick up bit 5 hang an LED with a 330 ohm
> or so resistor in series to ground. It should light when there is an alert.
> You can simulate this by doing the following -
>
> echo "test" > /tmp/AUTOSKY/warnings.txt  # to turn it on - alert
> echo > /tmp/AUTOSKY/warnings.txt   # To turn it off - no alert
>
> See the script for info on changing bits if required. The script assume the
> first node. If you are using a second node you would need to specify it in
> the first parameter to the script -   test_alert.sh <node>
>
> Run it in the background after testing  -  test_alert.sh <node> &
> Best to copy to /etc/asterisk/local  and run from there if you are changing
> anything.
> could be called at boot in /etc/rc.local - add line at end.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
>