[arm-allstar] Extending Courtesy tones

[Doug Crompton]

Lonny,

 Not sure wht you mean by "say link status"  There is a full link status
which is mapped to *75.  DTMF commands are linked to actual system commands
in the function section of rpt.conf. You also need to reference the
functions howto at hamvoip.org.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Tue, Nov 6, 2018 at 7:02 PM "Lonny Barry via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I will put this into play this evening.
>
> Can you give me more information please on "Say Link Status" from the
> control menu.
>
> It does not appear to be configured in my rpt.conf and does nothing on
> execution.
>
> Thanks Doug!
>
> And can I say that it is quite refreshing how you handle this list. Thank
> you for what you and your group do!
>
> Lonny
> KG5IGJ
>
> On Tue, Nov 6, 2018, 4:53 PM "Doug Crompton via ARM-allstar" <
> arm-allstar at hamvoip.org wrote:
>
> > Lonny,
> >
> >   In general there is no tone at completion of a command. If you want
> > connection information you should set telemdefault=2  then it will say
> the
> > connects and disconnects made on YOUR node directly but mute any
> additional
> > ones to that node after about a minute.  There obviously is a different
> > courtesy tone when not connected verses connected. But this would not
> tell
> > you if more than one connected as it would stay the same.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> >
> > On Tue, Nov 6, 2018 at 11:49 AM "Lonny Barry via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > I intend to be largely administering this node via DTMF. I realize this
> > is
> > > nothing new. However, I'd like some kind of confirmation that
> > instructions
> > > have been completed. I see "functcomplete" in the telemetry section of
> > the
> > > rpt.conf and I'm wondering if that might accomplish what I'd like to
> do.
> > >
> > > For example, I'd like to issue a DTMF instruction to connect to node
> > XXXX.
> > > Short of having a voice response "Connected to node XXXX", I was
> > examining
> > > options for Courtesy Tones. This was when I stumbled across
> > functcomplete.
> > >
> > > Can someone enlighten me or point me to a resource?
> > > I've reviewed distinctive_courtesy_tones_howto.pdf but I don't see any
> > > relevant solutions.
> > >
> > > Thank you for your assistance.
> > >
> > > Lonny
> > > KG5IGJ
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>