[arm-allstar] Zoiper question

[Doug Crompton]

Unless your router has hairpin loop-back the public IP of your router will
not work within your LAN. While most routers have that not all do. You will
know when it does not work! The router has to recognize its own public IP
on the LAN and also apply port forwarding rules to it for it to work. So
even if you do have hairpin loop-back to use your public IP within your LAN
you need to have port forwarding setup so it knows to what IP address to
direct the port on your LAN.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*





On Wed, May 23, 2018 at 8:05 PM, "Joe Puma via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> To be honest you only need the one with the routable IP or dynamic dns.
> When you’re  home it will work and when you’re out it will work too. I do
> this with my security camera system as well.
>
> Joe
> KD2NFC
>
>
> Sent from my iPhone
>
> > On May 23, 2018, at 5:16 PM, Danny K5CG via arm-allstar <
> arm-allstar at hamvoip.org> wrote:
> >
> > In Zoiper (Android), you can select which accounts to register by taping
> on the Settings icon, then tap the Account chooser. You should see the list
> of your configured accounts and to the right of each, a checkbox. Tap the
> checkbox once to enable (green if registration is successful, red if
> failed), tap again to disable (grey if disabled).
> >
> > Danny
> > K5CG
> >
> >
> > ----- Original Message -----
> > From: "ARM Allstar" <arm-allstar at hamvoip.org>
> > To: "ARM Allstar" <arm-allstar at hamvoip.org>
> > Cc: "Jorge Mejia P" <laussana at icloud.com>
> > Sent: Wednesday, May 23, 2018 4:00:01 PM
> > Subject: [arm-allstar] Zoiper question
> >
> > Many thanks for the several replies to my posting.
> >
> > I finally got it going by creating two accounts, one for my home network
> and the other one for internet access. The only thing now is that even
> though I disable the one that is not to  used depending whether I am away
> from home it keeps on trying to register so I can't enter my node number on
> the dial pad. It says not ready.  The work around is to delete the account
> that is not to be used from that particular location (local network or
> internet access)
> > Jorge hk4cze
> > Node 46546
> >
> > Sent from my iPad
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org