[arm-allstar] messages every 30s.

[Joe Puma]

I see this too not every 30 seconds though.  I’ve seen with a 5v 15amp psu also. This under-voltage can be seen in the Raspian releases as a lighting bolt in the upper right corner. 

Joe
KD2NFC 

Sent from my iPhone

> On May 16, 2018, at 4:52 PM, Doug Crompton via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Lito,
> 
> This is possibly a real message indicating power supply issues. Have you
> tried another supply?
> 
> See -
> 
> https://www.raspberrypi.org/forums/viewtopic.php?t=210914
> 
> https://github.com/raspberrypi/linux/issues/2512
> 
> Power supply issues are a real problem with Pi's and responsible for many
> of the issues we see where flakiness occurs.
> 
> 
> *73 Doug*
> 
> *WA3DSP*
> 
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> 
> 
> On Wed, May 16, 2018 at 4:39 PM, "Roselito de los Reyes via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
>> 
>> Hello David,
>> 
>> I just downloaded the newest release but I am spammed with a voltage
>> normalised (0x00000000) and under-voltage detected! (0x00050005) messages
>> every 30s.
>> 
>> I tried adding avoid_warnings=1 in /boot/config.txt but to no avail.
>> 
>> 73,
>> 
>> Lito de WI6Y
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org