[arm-allstar] My node is not connecting any more
David McGough
kb4fxc at inttek.net
Sat May 12 17:38:40 EST 2018
Hi Micheal,
I just tested connecting from my 41331 node to 27871. I was able to
connect using the g726aal2 CODEC, but not with ulaw....I guessing this may
be he problem: perhaps all the WinSystem nodes now only allow ulaw?
If this is the case, just add a statement like:
allow=ulaw
just after the allow=g726aal2 line in the [general] stanza of your
/etc/asterisk/iax.conf file.
73, David KB4FXC
On Sun, 13 May 2018, "Michael Carey via arm-allstar" wrote:
> Hi David,
I just tied 2124 and 2135 (WAN Network) with the same results; :-(
[May 13 07:46:59] NOTICE[30028]: chan_simpleusb.c:2893 simpleusb_read:
Got DTMF char *
[May 13 07:47:00] NOTICE[30028]: chan_simpleusb.c:2893 simpleusb_read:
Got DTMF char 3
[May 13 07:47:01] NOTICE[30028]: chan_simpleusb.c:2893 simpleusb_read:
Got DTMF char 2
[May 13 07:47:01] NOTICE[30028]: chan_simpleusb.c:2893 simpleusb_read:
Got DTMF char 1
[May 13 07:47:02] NOTICE[30028]: chan_simpleusb.c:2893 simpleusb_read:
Got DTMF char 3
[May 13 07:47:02] NOTICE[30028]: chan_simpleusb.c:2893 simpleusb_read:
Got DTMF char 5
[May 13 07:47:03] WARNING[30028]: channel.c:2447 ast_indicate_data:
Unable to handle indication 13 for 'IAX2/65.110.106.180:4569-9698'
   -- Hungup 'DAHDI/pseudo-404715155'
   -- Hungup 'DAHDI/pseudo-1619672502'
[May 13 07:47:06] NOTICE[30022]: chan_iax2.c:4087 __auto_congest:
Auto-congesting call due to slow response
   -- Hungup 'IAX2/65.110.106.180:4569-9698'
   -- Hungup 'DAHDI/pseudo-880073874'
   -- <DAHDI/pseudo-1614741108> Playing 'rpt/node' (language 'en')
   -- <DAHDI/pseudo-1614741108> Playing 'digits/2' (language 'en')
   -- <DAHDI/pseudo-1614741108> Playing 'digits/1' (language 'en')
   -- <DAHDI/pseudo-1614741108> Playing 'digits/3' (language 'en')
   -- <DAHDI/pseudo-1614741108> Playing 'digits/5' (language 'en')
   -- <DAHDI/pseudo-1614741108> Playing 'rpt/connection_failed'
(language 'en')
   -- Hungup 'DAHDI/pseudo-1614741108'
[May 13 07:47:26] NOTICE[30028]: chan_simpleusb.c:2893 simpleusb_read:
Got DTMF char *
[May 13 07:47:27] NOTICE[30028]: chan_simpleusb.c:2893 simpleusb_read:
Got DTMF char 3
[May 13 07:47:28] NOTICE[30028]: chan_simpleusb.c:2893 simpleusb_read:
Got DTMF char 2
[May 13 07:47:28] NOTICE[30028]: chan_simpleusb.c:2893 simpleusb_read:
Got DTMF char 1
[May 13 07:47:29] NOTICE[30028]: chan_simpleusb.c:2893 simpleusb_read:
Got DTMF char 2
[May 13 07:47:29] NOTICE[30028]: chan_simpleusb.c:2893 simpleusb_read:
Got DTMF char 4
[May 13 07:47:30] WARNING[30028]: channel.c:2447 ast_indicate_data:
Unable to handle indication 13 for 'IAX2/65.110.106.180:4569-1110'
   -- Hungup 'DAHDI/pseudo-1034229360'
   -- Hungup 'DAHDI/pseudo-1459062826'
[May 13 07:47:33] NOTICE[30019]: chan_iax2.c:4087 __auto_congest:
Auto-congesting call due to slow response
   -- Hungup 'IAX2/65.110.106.180:4569-1110'
   -- Hungup 'DAHDI/pseudo-339161486'
   -- <DAHDI/pseudo-1367899883> Playing 'rpt/node' (language 'en')
   -- <DAHDI/pseudo-1367899883> Playing 'digits/2' (language 'en')
   -- <DAHDI/pseudo-1367899883> Playing 'digits/1' (language 'en')
   -- <DAHDI/pseudo-1367899883> Playing 'digits/2' (language 'en')
   -- <DAHDI/pseudo-1367899883> Playing 'digits/4' (language 'en')
   -- <DAHDI/pseudo-1367899883> Playing 'rpt/connection_failed'
(language 'en')
   -- Hungup 'DAHDI/pseudo-1367899883'
vk5zea*CLI>
Michael.
VK5ZEA
On 13/05/2018 7:34 AM, David McGough wrote:
> Hi Michael,
>
> This looks like a connection issue directly with node 2560, for some
> reason??
>
> Are you able to connect to ANY other AllStar nodes or do you get the same
> network congestion message?
>
> 73, David KB4FXC
>
>
>
>
> On Sun, 13 May 2018, "Michael Carey via arm-allstar" wrote:
>
>> Hi Everybody,
> I'm having trouble with my AllStarLink node; 27871
>
> It's running on a Beaglebone Black and has been virtually bulletproof
> for three years. I used to connect up to the WinSystem all the time for
> their Insomniac Net until a change in my career made participating a
> lot harder... so my node has been sitting idle for around six months.
>
> The other day I tried to link up again... just for old times sake... but
> to no avail. Initially the node refused to acknowledge any commands at
> all.  A reboot seemed to make it more responsive but still no joy with
> connecting.
>
> I've checked my router/firewall and nothing has changed there. I have
> no connectivity issues;
>
> PING register.allstarlink.org (67.215.233.178) 56(84) bytes of data.
> 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=1 ttl=52
> time=182 ms
> 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=2 ttl=52
> time=182 ms
> 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=3 ttl=52
> time=182 ms
> 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=4 ttl=52
> time=182 ms
>
> Below is a sample output from Asterisk when I try to link to node 3560;
>
> [May 13 06:58:57] NOTICE[408]: chan_simpleusb.c:2893 simpleusb_read: Got
> DTMF char *
> [May 13 06:58:58] NOTICE[408]: chan_simpleusb.c:2893 simpleusb_read: Got
> DTMF char 3
> [May 13 06:58:58] NOTICE[408]: chan_simpleusb.c:2893 simpleusb_read: Got
> DTMF char 2
> [May 13 06:58:59] NOTICE[408]: chan_simpleusb.c:2893 simpleusb_read: Got
> DTMF char 5
> [May 13 06:59:00] NOTICE[408]: chan_simpleusb.c:2893 simpleusb_read: Got
> DTMF char 6
> [May 13 06:59:00] NOTICE[408]: chan_simpleusb.c:2893 simpleusb_read: Got
> DTMF char 0
> [May 13 06:59:01] WARNING[408]: channel.c:2447 ast_indicate_data: Unable
> to handle indication 13 for 'IAX2/173.82.59.253:4569-10970'
>    -- Hungup 'DAHDI/pseudo-1332342241'
>    -- Hungup 'DAHDI/pseudo-324726405'
> [May 13 06:59:04] NOTICE[402]: chan_iax2.c:4087 __auto_congest:
> Auto-congesting call due to slow response
>    -- Hungup 'IAX2/173.82.59.253:4569-10970'
>    -- Hungup 'DAHDI/pseudo-275518100'
>    -- <DAHDI/pseudo-864007839> Playing 'rpt/node' (language 'en')
>    -- <DAHDI/pseudo-864007839> Playing 'digits/2' (language 'en')
>    -- <DAHDI/pseudo-864007839> Playing 'digits/5' (language 'en')
>    -- <DAHDI/pseudo-864007839> Playing 'digits/6' (language 'en')
>    -- <DAHDI/pseudo-864007839> Playing 'digits/0' (language 'en')
>    -- <DAHDI/pseudo-864007839> Playing 'rpt/connection_failed'
> (language 'en')
>    -- Hungup 'DAHDI/pseudo-864007839'
>
> Can anyone tell me what "Unable to handle indication 13 for
> 'IAX2/173.82.59.253:4569-10970'" and "chan_iax2.c:4087 __auto_congest:
> Auto-congesting call due to slow response" means?
>
> Regards,
>
> Michael.
> VK5ZEA
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2/3 web page - http://hamvoip.org
More information about the arm-allstar
mailing list