[arm-allstar] ilink commands not working

[Doug Crompton]

Greg,

 If you are not registered you will not have any downloaded nodes to
connect to. The connection process will fail silently if the node does not
exist. Try

chk_reg.sh   at the Linux prompt to see if you are registered.

If registration is failing turn off your node for 5-10 minutes and it
should register when it comes back.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*




On Thu, May 3, 2018 at 1:03 PM, "Greg via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Where would I begin to look for something missing with this issue? The
> dtmf commands whether done through rf or cli 'rpt fun <node> *73' (etc) do
> nothing, no response or cli output. The *81, *82 and macros work fine but
> all that point to ilink,3 etc do nothing...
> Greg
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>