[arm-allstar] Supermon cannot connect to manager

[Roger Coudé]

Adding to the mystery: just disconnected all external nodes and now I have a nice "Local Node RX-Keyed" and "No connexion" instead of "Connecting to Asterisk Manager ..." Same behavior on two different sites.It reverts to " Connecting to Asterisk Manager ..." or freezes as soon as an external allstar node is connected. (all this with 127.0.0.1 and I can login and logout no problem and get all commands).RogerVE2DBE


      De : Doug Crompton via arm-allstar <arm-allstar at hamvoip.org>
 À : ARM Allstar <arm-allstar at hamvoip.org> 
Cc : Doug Crompton <wa3dsp at gmail.com>
 Envoyé le : mercredi 21 mars 2018 10h55
 Objet : Re: [arm-allstar] Supermon cannot connect to manager
   
Roger,

 In order to use the rx cos from a remote site you must have AMI connection
to there BUT it is not a good idea to do that without using a firewall as
AMI is not secure. I have put together a new howto that I will put out
later today with info on doing that. Here is how to make it work to test -

The remote node must allow port 5038 to pass to it. In manager.conf change
the bindaddress from 127.0.0.1 to 0.0.0.0 - Comment one and uncomment the
other. Restart Asterisk there. In the route at that location port forward
port 5038 TCP to the address of the Allstar server there. Make sure you
have your local allmon.ini file configured with a stanza to go the the
public IP address of the remote site :5038.

Once you have this working you  have full control of that site from that
site - connect/disconnect, etc. and any actions there including RX-Keyed is
shown in your local screen.

Make sure you put in the iptables example shown in the howto I will put out
this afternoon.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Wed, Mar 21, 2018 at 9:34 AM, "Roger Coudé via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> After last week update, I am very happy with the new RX cor display.That
> will be very helpful for the network maintenance.I have enabled the
> supermon on two locations in order to test.One site is working fine, I see
> a Rx line poping when the local radio is receiving.But the second
> site tries to connect forever with a cycling / at the bottom of the node
> status webpage.I did a local Telnet 127.0.0.1 port 5038 and was able to
> perform action: logon without problem.Both supermon and allmon2 are unable
> to connect on the second server.Double checked the user password ok.Any
> clue?RogerVE2DBE
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org