[arm-allstar] Radio less Hub hamvoip allmon2 edit locatio

[Doug Crompton]

Don,

You did not say where you were looking at this display but I suspect
lsnodes or supermon?

  This is edited at allstarlink.org -  You can put alpha characters in the
frequency field under the node description. You are limited to the number
of characters so if it does not update the field you know you went over.  I
have put things in there like  "Digital Hub"  but "Radio-less Node" might
be too long.. If so you might be able to say "Radio-less"

Your location is specified in the server description. If this is a fixed
node you could put the town and location. If it is mobile you  could just
say that or maybe something like "anywhere, USA"  or "Philadelphia area"
or  "New England area",  etc.  There is no rule as to what you can put in
as long as it fits.

In order to see the updates you make at allstar link you will need to run
astdb.php  at the Linux prompt on your server. This is done automatically
once every 24 hours so to see an immediate update you need to bring in the
updated file.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Sat, Mar 17, 2018 at 12:22 PM, "Don Sandin via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

>
>
> Sent from Mail for Windows 10
> Hi to all in this great group ! I am trying to set up my node as a
> radioless Hub. I would like to know how to change this in the display
> Status for ( Callsign)    Node  ( Node number)  to display on the line next
> to the right of callsign  under description to {Radio less node}.
> I have searched groups & web & no hits on this. I have seen where others
> have made  custom changes to this description.  73s to one all Don
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org