[arm-allstar] Node to node connexion problem

[C B]

Hi
I am still experiencing the same one way audio issue intermittently.
thank you for the work you are doing on this issue.
Chris

      From: Chris Souleles via arm-allstar <arm-allstar at hamvoip.org>
 To: ARM Allstar <arm-allstar at hamvoip.org> 
Cc: Chris Souleles <csouleles at prodigy.net>
 Sent: Tuesday, March 13, 2018 10:24 AM
 Subject: Re: [arm-allstar] Node to node connexion problem
   
I don't know if it is the same phenomenon but I have 2 RPI3 nodes that I keep always connected over the internet both running the latest release of HAMVOIP and occasionally one side can hear and the other can't and I disconnect and reconnect and all is well again.  I have never figured out why this happens, but I live with it.  Chris - W6CS - 73.  

      From: David McGough via arm-allstar <arm-allstar at hamvoip.org>
 To: Roger Coudé via arm-allstar <arm-allstar at hamvoip.org> 
Cc: David McGough <kb4fxc at inttek.net>
 Sent: Tuesday, March 13, 2018 7:18 AM
 Subject: Re: [arm-allstar] Node to node connexion problem
  

Hi Roger,

The issue you're encountering has been called the ANNOYING "one way audio" 
bug. 

This is a known problem that has been in the code for a long time and
seems to impact all AllStar releases at least since version 0.325, which
is several year old.  I'm actively looking for the cause of and fix for
this issue.

Some users see this issue fairly frequently, others never or almost never.  
On my network, I fall into the almost never category--which doesn't help
me find a solution very quickly.

On a positive note, I think I've identified most of the chain of events 
that have to occur to trigger this problem.

I'll have a fix for this as soon as possible.

73, David KB4FXC




On Tue, 13 Mar 2018, "[UTF-8] Roger Coudé via arm-allstar" wrote:

> I am new to this forum We use many repeaters controlled with a RPI3 and Rim Lite
RPi2-3 Version 1.5rc4-16 Allstar - March 10, 2018 - KB4FXC, WA3DSP

Recently we observed a strange behavior:We have many locations where 
a repeater (allstar node) is connected to a transceiver (local node).The 
repeater is normally connected to the network via the RF link (We use the 
Internet only as a backup)Once in a while, users complain they do not ear 
anything from the network.I use IaxRpt and observe that there is no 
communications between the two nodes.However, the cli rpt nodes command 
show that the nodes are connected.If I disconnect and reconnect the 
nodes, everything is ok.I tested both ilink 3 and ilink 13, same 
problem. Has anybody noticed that behavior?

Roger Coude
www.ve2dbe.com
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org

  
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org