[arm-allstar] simpleusb_tune_usb.conf

[Doug Crompton]

Jay,

 If the RIM's are not being used by Allstar - not defined as simpleusb in
the rxchannel= statement in rpt.conf then Allstar has no knowledge of them
and simpleusb-tune-menu will not recognize them. If you are using them for
another application outside of Asterisk/Allstar then you owuld have to use
an external or system program to set levels like alsamixer.

simpleusb.conf is configured through running simplusb-tune-menu and
specifying the adapter to use if there is more than one but the adapter
will not be active unless it is defined in rpt.conf.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sun, Jul 29, 2018 at 11:57 AM, "Jay Urish via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I have a hub node setup that is radioless. On the same node I have 3 RIMs
> for connecting to other controllers etc.
>
> Are all the audio levels supposed to be defined in simpleusb_tune_usb.conf
> ?
> Is this file "included" by another file?
>
> jay
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>