[arm-allstar] will not connect

[Doug Crompton]

Kevin,

 In order to diagnose your problem we need to know if your node is
registering upon reboot or restart.  The check_reg.sh
script will tell you if you are registered. The second problem and probably
your issue is downloading the node list. There have been many reported
issues with this lately. This is not a hamvoip issue but there is a fix and
that is to use the DNS node lookup method which is part of your hamvoip
package. I will send you the howto on setting it up. It is very simple to
do.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sat, Jul 28, 2018 at 11:20 AM, "Kevin Halton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I am having issues with several nodes connecting if I do a restart, shut
> down, or reboot. It will take upwards of 60 minutes if not longer before I
> can connect to any ASL node whether on my LAN or elsewhere. I have all the
> required entries in rpt.conf. Any suggestions?
>
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>