[arm-allstar] identifying private nodes via public nodes

[Doug Crompton]

Jay,

 The short answer is no but you can add private node information for local
use like lsnodes or supermon. This is done in
/etc/asterisk/local/privatenodes.txt - privatenodes.readme gives info. This
information is appended to the local database of nodes when astdb.php is
run and then will display on lsnodes and supermon. Here is an example on
one of my nodes -

cat /etc/asterisk/local/privatenodes.txt

1600|WA3DSP|Six Meter Repeater RX|Richboro/Warrington, PA
1601|WA3DSP|Six Meter Repeater TX|Richboro/Warrington, PA
1700|WA3DSP|Broadcastify|

In general you would not want private node information in a public
database. No one can connect to it and it would only be useful to you.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Mon, Jul 9, 2018 at 6:33 PM, "Jay Urish via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Doug,
>
> I have 3 private nodes hanging off of my hub node 45941. When you look a
> the bubble chart, the private nodes are pink colored andnot in the
> database. Is there are way to have the parent node provide information to
> the reg server to populate the bubble chart?
>
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>