[arm-allstar] Pi 3b+ physical to logical USB map locking

[Doug Crompton]

Jack,

 The procedure is not that long. See the end part of the setup howto at
hamvoip. You just have to see up and plug in one at a time until you get
all plugged in. You only do this once not every time you boot.

Doug

On Sun, Jul 1, 2018 at 1:49 PM, "Jack Koehler 2 via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Yeah, that can do it, but we had a way of controlling the probe process but
> I can't remember it as it was a long time ago.
> This is a lengthy procedure to do each time it is booted.
> Will do a bit more research.
> Jack
>
>
> -----Original Message-----
> From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> "Doug Crompton via arm-allstar"
> Sent: Sunday, July 1, 2018 1:40 PM
> To: ARM Allstar
> Cc: Doug Crompton
> Subject: Re: [arm-allstar] Pi 3b+ physical to logical USB map locking
>
> Jack,
>
>   Did you just move the SD card over to the 3B+?  I think you need to
> follow the same process as you did on the prior board of bringing one
> online at a time. Comment out the rxchannel line for everything but the
> first and then bring them online one at a time uncommenting each rxchannel
> and storing the setup as per the setup instructions. You may have to delete
> the /etc/asterisk/simpleusb_tune_usb.conf file first as it has the old
> mappings. Then do the setup one at a time.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Sun, Jul 1, 2018 at 12:55 PM, "Jack Koehler 2 via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Hello David (and Doug),
> > Had been using 3b for a while with 4 FOBs for remote VHF/UHF transceiver
> > remote control from a MIC node.
> > Rebooting the 3b would always come up with the same logical to physical
> > mapping.
> > Now that I have moved to the b+, I get random mapping.  Tried booting
> with
> > the 1st one installed then adding the others in the original order I did
> > when first setting them up but still get a couple swapped.
> > Is there any way to lock the mapping? Or modifying the probe order?
> > Thanks.
> > Jack  K3OYH
> >
> >
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>