[arm-allstar] Issues with Broadcastify streaming audio off of my node...

[W2YMM]

Bill, Is the error you found in you .xml file visible in the sample you
first posted ? I was trying to find it but didn't.
I also decided to try this out and seem to be getting similar errors.  I'll
keep looking...
Thanks   Bob W2YMM

<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Virus-free.
www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

Robert Prybyzerski Jr
W2YMM
631-960-1051
http://www.w2ymm.com

On Wed, Jan 17, 2018 at 5:14 PM, "Doug Crompton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I am on my way out but here is a quick message on this... The line in
> rpt.conf should look like this:
>
> outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8
> --bitwidth 16 - - 2> /tmp/stream.status | /usr/local/bin/ezstream -qvc
> /etc/ezstream.xml
>
> ​Cut and paste it to make sure you have it right. It must go in the node
> stanza for the node you want to broadcast.
>
> Also run ezstream manually at the Linux prompt to make sure it is working
> and the config file has no errors -
>
> ​ezstream -qvc /etc/ezstream.xml
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
>
>
>
>
>
> On Wed, Jan 17, 2018 at 4:00 PM, "Mr. Possum (Bill) via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > I followed the how to, I searched past message traffic here, I searched
> > Google, but I am still having an issue...
> > rpt.conf line says -
> > outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8.0
> > --bitwidth 16 - - | /usr/local/bin/ezstream -c
> > /etc/ezstream.xmln/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8
> > --bitwidth 16 - - 2> /tmp/stream.status | /usr/local/bin/ezstream -qvc
> > /etc/ezstream.xml
> >
> > The feed never comes up and in my CLI window I keep getting the
> following,
> > over and over and over again...
> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
> > --preset cbr 16 -r -m m -s 8.0 --bitwidth 16 - - |
> /usr/local/bin/ezstream
> > -c /etc/ezstream.xml
> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
> > --preset cbr 16 -r -m m -s 8.0 --bitwidth 16 - - |
> /usr/local/bin/ezstream
> > -c /etc/ezstream.xml
> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
> > --preset cbr 16 -r -m m -s 8.0 --bitwidth 16 - - |
> /usr/local/bin/ezstream
> > -c /etc/ezstream.xml
> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
> > --preset cbr 16 -r -m m -s 8.0 --bitwidth 16 - - |
> /usr/local/bin/ezstream
> > -c /etc/ezstream.xml
> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
> > --preset cbr 16 -r -m m -s 8.0 --bitwidth 16 - - |
> /usr/local/bin/ezstream
> > -c /etc/ezstream.xml
> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
> > --preset cbr 16 -r -m m -s 8.0 --bitwidth 16 - - |
> /usr/local/bin/ezstream
> > -c /etc/ezstream.xml
> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
> > --preset cbr 16 -r -m m -s 8.0 --bitwidth 16 - - |
> /usr/local/bin/ezstream
> > -c /etc/ezstream.xml
> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
> > --preset cbr 16 -r -m m -s 8.0 --bitwidth 16 - - |
> /usr/local/bin/ezstream
> > -c /etc/ezstream.xml
> >
> > I tried this rpt.conf line from another internet tutorial -
> >
> > outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8
> > --bitwidth 16 - - 2> /tmp/stream.status | /usr/local/bin/ezstream -qvc
> > /etc/ezstream.xml
> > The feed never comes up and in my CLI window I keep getting this over and
> > over and over again -
> >
> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
> > --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - 2> /tmp/stream.status |
> > /usr/local/bin/ezstream -qvc /etc/ezstream.xml
> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
> > --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - 2> /tmp/stream.status |
> > /usr/local/bin/ezstream -qvc /etc/ezstream.xml
> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
> > --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - 2> /tmp/stream.status |
> > /usr/local/bin/ezstream -qvc /etc/ezstream.xml
> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
> > --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - 2> /tmp/stream.status |
> > /usr/local/bin/ezstream -qvc /etc/ezstream.xml
> >
> >
> >
> > My ezstream.xml file looks like this -
> >
> > <ezstream>
> >     <url>http://audio1.broadcastify.com:80/TheMountNameTheyGaveMe</url>
> >     <sourcepassword>ThePassWordTheyGaveMe</sourcepassword>
> >
> >     <format>MP3</format>
> >     <filename>stdin</filename>
> >     <svrinfoname>N5MBM 52.3500 MHz Repeater</svrinfoname>
> >
> >     <svrinfourl>https://www.broadcastify.com</svrinfourl>
> >     <svrinfogenre>Amateur Radio</svrinfogenre>
> >     <svrinfodescription>N5MBM 52.3500 MHz Repeater</svrinfodescription>
> >     <svrinfobitrate>16</svrinfobitrate>
> >     <svrinfochannels>1</svrinfochannels>
> >     <svrinfosamplerate>22050</svrinfosamplerate>
> >     <svrinfopublic>1</svrinfopublic>
> > </ezstream>
> >
> >
> > Does anyone have any idea where I went wrong?
> > It's GOT to be something simple!
> > I have had this particular stream running for years on and old radio
> shack
> > scanner piped into scannercast running on an old Windoze box I would
> really
> > like to retire.  I would rather just have the RasPi on the node stream
> > right to it.
> > Could it be something as simple as having the redirect a port forwarding
> > rule from the old Windoze box to the Ras Pi?  I tried that and still
> can't
> > get it to work...
> > I am sort of stumped at the moment...
> >
> > Bill - N5MBM
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>