[arm-allstar] HamVoIP I/O support - What is Best Current Practice for implementing I/O?

[Doug Crompton]

Lloyd,

 Go into the asterisk client - menu #11 - watch DTMF as you enter it. See
hat the results are. Are you seeing proper DTMF characters being entered?
Is there an error when it executes the script line?


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Wed, Jan 17, 2018 at 12:18 PM, "Lloyd Duck via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Doug,
>
> Ok I’ll comment that fourth but out.
>
> Yes, still having trouble with getting the function statement to work,
> DTMF is not working at all.
> I have a feeling it’s something simple I’ve missed turning on at some
> point.
>
> Yes I restarted Asterisk and yes I’m using *831 from my Radio.
>
> ARES®   Amateur Radio Emergency Service®
> Lloyd Duck, W5LND
> Emergency Coordinator
> Howard Co, Texas
> Email: w5lnd at arrl.net
> Cellphone: 432-210-3473
>
> On Jan 17, 2018, at 10:17 AM, Doug Crompton via arm-allstar <
> arm-allstar at hamvoip.org> wrote:
>
> LLoyd,
>
>   Glad to hear it worked. Yes you can eliminate the fourth bit. Just
> comment where it is sent out in the eval line at the bottom of the script.
> It will still show but not go out.
>
> Are you still having trouble getting the function statement to work? That
> path is where the script is located right? You are using *831, etc? You did
> restart Asterisk after you put the function commands in?
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
>
> On Wed, Jan 17, 2018 at 8:47 AM, "Lloyd Duck via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > The script works great, thank you… The radio changed just like it should.
> >
> > I did change these for the RB-USB. I know I don’t use GPIO8, but I
> thought
> > the script needed it. Can I just remove it?
> > BCD1=$ASTcommand"GPIO5="
> > BCD2=$ASTcommand"GPIO6="
> > BCD4=$ASTcommand"GPIO7="
> > BCD8=$ASTcommand"GPIO8="
> >
> > The function statement didn’t work. Is there something else I need to do
> > and enable DTMF control?
> > I did add the statements in the rpt.conf and restarted the program.
> > 831=cmd,/etc/asterisk/local/bcd_control.sh 1 46663
> > 832=cmd,/etc/asterisk/local/bcd_control.sh 2 46663
> > 833=cmd,/etc/asterisk/local/bcd_control.sh 3 46663
> >
> >
> >
> > Lloyd Duck
> > W5LND
> >
> > On Jan 17, 2018, at 3:53 AM, Lloyd Duck via arm-allstar <
> > arm-allstar at hamvoip.org> wrote:
> >
> > Ok Doug,
> >
> > The RB-USB does have diodes for protection, that should be covered. This
> > uses gpio 5, 6 ,7 and 8 but 8 is used for CTCSS. The most will be 8
> > channels used with 5, 6 and 7 only.
> >
> > http://www.repeater-builder.com/products/pdfs/RB_RIM_Max.pdf
> >
> > I’ll report back today. Thank you again.
> >
> > ARES®   Amateur Radio Emergency Service®
> > Lloyd Duck, W5LND
> > Emergency Coordinator
> > Howard Co, Texas
> > Email: w5lnd at arrl.net
> > Cellphone: 432-210-3473
> >
> > On Jan 16, 2018, at 11:32 PM, Doug Crompton <wa3dsp at gmail.com> wrote:
> >
> > Lloyd,​
> >
> > OK hopefully this will be the last update. In my haste to get that script
> > to you I left out one important thing. It was in the code but I forgot to
> > define it. You need to specify your node number in the command. Here is
> the
> > example and the updated script is attached.  This shows node 1998 and
> > channel 5.
> >
> > ​ ./bcd_control_usb.sh 5 1998
> > Entered Channel 5
> > Executing - /bin/asterisk -rx "rpt cmd 1998 cop 61 GPIO1=1"
> > Executing - /bin/asterisk -rx "rpt cmd 1998 cop 61 GPIO2=0"
> > Executing - /bin/asterisk -rx "rpt cmd 1998 cop 61 GPIO4=1"
> > Executing - /bin/asterisk -rx "rpt cmd 1998 cop 61 GPIO5=0"
> >
> > So the rpt.conf function statement if that is what you are using would be
> > (using your node number) -
> >
> > 831=cmd,/etc/asterisk/local/bcd_control_usb.sh 1 1998
> > 832=cmd,/etc/asterisk/local/bcd_control_usb.sh 2 1998
> > etc.
> >
> > Sorry for the confusion.
> >
> > 73 Doug
> > WA3DSP
> > http://www.crompton.com/hamradio
> >
> >
> > <bcd_control_usb.sh>
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org