[arm-allstar] HamVoIP I/O support - What is Best Current Practice for implementing I/O?

[Lloyd Duck]

This is the same thing I'm trying to do with the RB-USB without any luck.
I've added the initial state to the /etc/asterisk/simpleusb.conf and by
changing the initial state and restarting the program the channels do change
on the radio. That works!

I've add the steps Doug stated with bcd_control.sh and even was able to
execute ./bcd_control.sh 02 without error and it did change when I executed
gpio readall. 
But the radio does not change channels. 

What am I missing? The script that changes the simpleusb.conf for the radio?
Bcd_control.sh doesn't control the RB-USB. 

Phil,
Will you expand on the script you gave the example? What is the cop 61?

Lloyd Duck
W5LND


-----Original Message-----
From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"Phil Visalli via arm-allstar"
Sent: Friday, January 12, 2018 9:44 AM
To: ARM Allstar <arm-allstar at hamvoip.org>
Cc: Phil Visalli <phil at philv.net>
Subject: Re: [arm-allstar] HamVoIP I/O support - What is Best Current
Practice for implementing I/O?

We did something similar using the GPIO pins on the DMK URI to steer thru 8
channels.

We first set the initial state of the GPIO pins in
/etc/asterisk/simpleusb.conf

gpio5=out0
gpio6=out0
gpio7=out0

Then just as Doug mentioned used DTMF tones to call a set of scripts, one
for each channel.  For example *801 might call a script called 'ch1.sh'
which would look something like this:

##########################################################
#!/bin/bash

/bin/asterisk -rvx "rpt cmd XXXXX cop 61 GPIO5=1,GPIO6=0,GPIO7=0"

/bin/asterisk -rvx "rpt localplay XXXXX /root/sounds/ch1"

exit 0
##########################################################

Where XXXXX is your node number.  I made sound files (using amazon
polly....good quality text to speech engine) that play and announce what
channel you just selected just so the user has confirmation of changing
channels.  Doug may have a more elegant or fancier version, but im pretty
sure that would work for you.

On Fri, Jan 12, 2018 at 3:10 AM, "Doug Crompton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Randy,
>
>   I have written a script to do exactly what you want to do using the 
> Pi I/O. I will dig it up tomorrow and pass it on.
>
> Caveats - the pi is strictly 3V logic.  If the lines are TTL 5V logic 
> then the best thing to do would be to use Schottky diodes on each line 
> similar to how COS is done on the FOB. The Pi would pull the 
> appropriate lines low but would not see the 5V from the radio. Really 
> a rather simple hardware interface.
>
> The channel is passed to the script via calls from rpt.conf functions 
> so DTMF would change the channel like -
>
> 1 - *801, 2 - *802, 3 - *803, etc.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
>
> On Fri, Jan 12, 2018 at 2:53 AM, "Randy Neals via arm-allstar" < 
> arm-allstar at hamvoip.org> wrote:
>
> > Hi,
> >
> > What is the best current practice for implementing I/O on a 
> > Raspberry Pi
> to
> > control external things.
> > In this case, remote channel selection on a VHF remote base, a radio
> with 8
> > channels and having external control lines.
> >
> > From looking through the list archives, I see references to using an 
> > Arduino Nano, and at an earlier time, using a USB I/O board from
> SparkFun,
> > and of course using the lines on the RPi itself.
> >
> > Anticipated questions...
> >
> > Q. What Am I trying To Do?
> > A. Control channel select lines on a VHF remote base station.
> >
> > Q. What format/How many lines?
> > A. 3 logic control lines. The lines are normally pulled up to +5V by 
> > the radio.
> >      BCD format with the lines having binary weighting of 4, 2, and 
> > 1 respectively.
> >      High = weighted value / Low = zero value.
> >
> > Q. What audio interface will I use?
> > A. Simple USB, likely DMK URI. (But I could use a USB FOB, or other 
> > interface if there is one with I/O)
> >
> > Thanks,
> > Randy
> > W3RWN
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org