[arm-allstar] Command macros

[Larry]

Thanks Doug,

Kinda what I thought the answer might be. Nice feature!

Larry - N7FM


On 01/09/2018 07:56 PM, "Doug Crompton via arm-allstar" wrote:
> Larry,
>
> They are only for hamvoip V1.5 Pi 2/3 firmware.
>
> Doug
>
> On Tue, Jan 9, 2018 at 10:31 PM, "Larry via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> Doug,
>>
>> A quick question...
>>
>> Having never seen any documentation for the commands you indicated in the
>> answer to Steve (listed below).
>> Are these new or do they exist for any platform using the SimpleUSB driver?
>>
>> Larry - N7FM
>>
>> On 01/08/2018 10:24 PM, "Doug Crompton via arm-allstar" wrote:
>>
>>> Steve,
>>>
>>>     The reason I was asking that was the method to send between servers is
>>> different then on the same server. I think Tim already gave you info on
>>> how
>>> to command a node on another server. The other thing is to use that method
>>> you have to be connected to the node you are controlling. So yes you can
>>> send commands to another node if you are connected to it. See my comments
>>> on this below.
>>>
>>> If you need to pass DTMF here are the options - these commands are to be
>>> placed in simpleusb.conf -
>>>
>>> dtmf_dsp=0    ; NO allstar command decoding, DTMF pass thru
>>> dtmf_dsp=1    ; Normal Allstar DTMF decoding and muting - this is the
>>> default
>>> dtmf_dsp=2    ; BOTH normal Allstar DTMF decoding AND DTMF pass thru. No
>>> muting
>>>
>>> Note that the *4 remote control in Allstar is a bad security hole that we
>>> are in the process of looking to correct and at least for now I expect
>>> everyone to use this responsibly. It has been in Allstar since forever and
>>> is a useful tool but I think all will agree it is NOT to be used without
>>> the permission of the remote node unless it is an emergency like
>>> disconnecting a hungup node. Users should have the ability to turn this
>>> control off or use some kind of a pin code to make it more secure. It is a
>>> powerful command but also one that could be abused. Back when it was
>>> created with several dozen Allstar users no one ever thought of the number
>>> of users (and hackers) that we have today!
>>>
>>>
>>> *73 Doug*
>>>
>>> *WA3DSP*
>>>
>>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>>
>>>
>>> On Tue, Jan 9, 2018 at 12:52 AM, "Steve Rogers via arm-allstar" <
>>> arm-allstar at hamvoip.org> wrote:
>>>
>>> Doug, I am working with both nodes on separate servers. A little more
>>>> digging and some emails from others I may have a solution, sort of. Which
>>>> brings up another question, which I think I have seen discussed here
>>>> before, which is how to pass DTMF through one node to another.
>>>>
>>>> Steve
>>>> _______________________________________________
>>>>
>>>> arm-allstar mailing list
>>>> arm-allstar at hamvoip.org
>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>>
>>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>>>
>>>> _______________________________________________
>>> arm-allstar mailing list
>>> arm-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>
>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>>
>>>
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>