[arm-allstar] Question to those using Echolink

[Doug Crompton]

Justin,

 Well that is NOT going to happen! Best thing is to get your Echolink
buddies on Allstar!!!


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Wed, Feb 28, 2018 at 4:55 PM, "Justin Reed via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> My problem with Echolink is it seriously needs a modern codec. That
> dial-up-era GSM stuff is bunk.
>
> Justin
>
>
> Sent from my iPhone
>
> > On Feb 28, 2018, at 3:52 PM, Robert Prybyzerski via arm-allstar <
> arm-allstar at hamvoip.org> wrote:
> >
> > My problem with the EchoLink side is during my Monday night net, while
> connected to an EchoLink conference server, the audio goes away.  We’re
> still showing as connected but there is no audio to or from the
> conference.  If I disconnect the node then reconnect it will be fine for
> the rest of the net.  But it happens on a weekly basis.
> >
> >
> >
> >
> > Sent from my iPhone
> > Bob W2YMM
> > 631-960-1051
> >
> >> On Feb 28, 2018, at 4:43 PM, Richard Bateman via arm-allstar <
> arm-allstar at hamvoip.org> wrote:
> >>
> >> The only issue we've had is it keeps getting locked in TX mode when one
> >> particular user tries to use it and the repeater gets stuck in a useless
> >> TX-only mode.  We asked him (regretfully) to stop using it and it's been
> >> fine since then, but it does make me a little nervous.
> >>
> >> Richard
> >>
> >> On Wed, Feb 28, 2018 at 2:32 PM, "Tom Whiteside via arm-allstar" <
> >> arm-allstar at hamvoip.org> wrote:
> >>
> >>> We have a number of regular Echolink users here and it runs like a top.
> >>> We've had no crashes of any sort here...
> >>>
> >>> Tom N5TW
> >>>
> >>> -----Original Message-----
> >>> Awhile back in early 2017 we fixed some significant long standing bugs
> in
> >>> Echolink that had been causing crashes. I am curious if anyone that is
> >>> using
> >>> Echolink with hamvoip Allstar has experienced any problems since then.
> I
> >>> cannot say I use Echolink extensively but I have not seen any issues
> here
> >>> and so far in the last 9 months or more only one person has recently
> >>> reported a problem that his system is crashing which we cannot
> reproduce.
> >>> While this could be due to many other factors we would like to get any
> >>> input
> >>> from others that might shed some light on this. I am not talking about
> >>> connectivity or setup issues but rather things like crashes that
> actually
> >>> cause an Asterisk restart.
> >>>
> >>> Echolink in general is secondary to Allstar and there as a
> convenience. We
> >>> have no control over the Echolink system in general so it is what it
> is in
> >>> both audio quality and reliability but it is a useful tool to reach
> those
> >>> not on Allstar or away from their Allstar systems.
> >>>
> >>>
> >>> *73 Doug*
> >>>
> >>> *WA3DSP*
> >>>
> >>>
> >>> _______________________________________________
> >>>
> >>> arm-allstar mailing list
> >>> arm-allstar at hamvoip.org
> >>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>
> >>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>>
> >> _______________________________________________
> >>
> >> arm-allstar mailing list
> >> arm-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org