[arm-allstar] Re-installing Asterisk

[Doug Crompton]

Chuck,

 You must be on a wired connection to setup. It should get an IP address
when it starts. The indication you are getting in update is that may not be
but if you can ssh in then it would have an IP address. Maybe it is not
able to get out on the Internet. Go to the bash shell and at the Linux
prompt type

ping uscd.edu

You should see return pings. If not your Internet is not working on the Pi.

You won't be able to ping hamvoip.org for security reasons.

It is possible that the SD card write was not 100%. You could try
re-imaging it.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Mon, Feb 26, 2018 at 3:44 PM, "Chuck Hurst via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Thanks Doug.
>
> For some reason my updater is not working so Asterisk still asks for a 6
> digit node password.  Mine is 12 digits (the new one). When I enter the
> updater, the monitor goes to a blank blue screen; nothing happens, then the
> main menu shows back up. Is that right?
> My network analyzer doesn't show the IP address given the wired connection
> 192.168.1.54, which is in the realm of my connections.
> The lights are on on my PI3 ethernet connection and the ethernet is plugged
> into the hub I am  sending you this email..
>
> Any help would be greatly appreciated.
>
> Thanks;
> Chuck
>
> -----Original Message-----
> From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> "Doug Crompton via arm-allstar"
> Sent: Monday, February 26, 2018 01:04 PM
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Cc: Doug Crompton <wa3dsp at gmail.com>
> Subject: Re: [arm-allstar] Re-installing Asterisk
>
> Chuck,
>
>    Yes you can restart the setup by going to the bash shell - item 10 on
> the
> main menu and at the prompt typing  firsttime.sh  - two t's  This will
> restart the setup. Make sure you do an update at the beginning.  Most of
> the
> items you previously entered will be in there. If you want to change
> something you can.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
>
>
> On Mon, Feb 26, 2018 at 2:01 PM, "Chuck Hurst via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > I filled in my Asterisk before I had properly updated (no internet
> > connection).   I need to change the password to the new 12 digit
> > alpha-numeric requirement.  Can I re-Start Asterisk? Or restart the
> > initial setup script (using BASH) ?
> >
> >
> >
> > Thanks
> >
> > Chuck Hurst
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>