[arm-allstar] Mobile node LED light when connected

[Doug Crompton]

Chris,

It probably could be done but it would require some scripting that I do not
have time to do.

I also don't understand your need to do this because if you connected to
the destination especially with a *73 permanent connect why would you not
be connected? Unless the other end specifically disconnected you or you
specifically disconnected at your end you should be and stay connected.
Also if you need to know if you are connected just keyup and identify. You
don't have to kerchunk.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
.

On Sun, Feb 25, 2018 at 2:13 PM, "chris novara via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Tested the beep and it works but we are interested in a visual indication
> so we don’t have to kurchunk our repeater system to see if the mobile node
> is connected.
>
> Can we hook a LED to a GPIO pin and create a macro to apply power of the
> node is connected to our hub?
>
> Any help would be great!
>
> Chris Novara
> Phone: 541-778-1175
> Eugene, Oregon
> Email-Chris at redcrosscommunications.org
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org