[arm-allstar] SSH No Workee

[Doug Crompton]

Jim,

 You do NOT have to port forward within your own LAN.  I think the problem
is you are not on the same LAN as your Allstar server and putty.

Can you ping the IP address of your Allstar server? If not then you are not
going to get there with ssh.

Are you possibly using double nat'ing?  How is the windows box hooked up to
your router and how is the Allstar server? Are they possibly connecting to
different routers?


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Fri, Feb 23, 2018 at 9:55 AM, "Jim Darrough via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Update.
>
>       Maybe I did NOT reboot. ANyway, now I am getting "no route to host"
> so I guess I need to log onto my router and allow the port.
>
> I'll report back later.
>
>
> 73 Jim KI7AY
>
>
> On 02/22/2018 10:03 PM, "Doug Crompton via arm-allstar" wrote:
>
>> Jim,
>>
>>   I am assuming you were able to login to the original 222 port using
>> these
>> programs? If that was the case and now you are not able to login to the
>> new
>> port and you have confirmed the new port is actually what is in the
>> /etc/ssh/sshd_config file then I am at a loss. If you are using dhcp and
>> have not made the dhcp address static in your router it may have changed
>> but whatever the Pi announces when it boots should be the correct IP
>> address. Make sure you are using ssh and not telnet. You can select other
>> than ssh in Putty and whatever port you want.
>>
>>
>> *73 Doug*
>>
>> *WA3DSP*
>>
>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>
>>
>>
>>
>>
>>
>> On Thu, Feb 22, 2018 at 10:25 PM, "KI7AY via arm-allstar" <
>> arm-allstar at hamvoip.org> wrote:
>>
>> Hey guys! Thanks for reading this.
>>>
>>> I have recently set up an allstar node with a Raspberry Pi 3, URIx
>>> interface, and an FT-2600m, and it works beautifully! I am, however at a
>>> loss as to why asterisk won't accept incoming SSH requests.
>>>
>>> I used the menu to reset the ssh port to 22x. I installed Putty on both
>>> a
>>> Windows laptop as well as my main hamming machine, a Ubuntu 16.03 system
>>> which, I believe, also works great. In either case, attempting to ssh to
>>> the ip address conveniently announced on  reboot of the RPi results in
>>> "connection refused".
>>>
>>> Any ideas  would be appreciated. I did look in ssh setup files in /etc
>>> and
>>> the port did indeed get changed to 22x, so the software seems to think
>>> it's
>>> right.
>>>
>>> 73  Jim Darrough KI7AY
>>>
>>>
>>> ---
>>> This email has been checked for viruses by Avast antivirus software.
>>> https://www.avast.com/antivirus
>>>
>>> _______________________________________________
>>>
>>> arm-allstar mailing list
>>> arm-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>
>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>>
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
>>
> --
> 73 Jim
> La ciruela de Panamá
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org