[arm-allstar] trying to creat a repeater

[David McGough]

Alan,

Try using duplex=2 in the rpt.conf stanza. If you set duplex=3,
RX --to--> TX audio isn't repeated.

73, David KB4FXC


On Mon, 12 Feb 2018, "Alan Matthews via arm-allstar" wrote:

> hi group
> 
> I am trying to create an allstar repeater. I am using a pair of yaesu ft7800 radios to do this with a uri interface.
> 
> i have a problem in that when I press the ptt on my handie I do not hear any audio being transmitted on the output.
> 
> when i run simple usb tune option number 2 i see a good audio level between the 2 markers. At the same time i hit ptt on my handie the tx radio goes into tx, however I hear a dead carrier on my rx handie.
> 
> when i dekey i do hear a beep, and when the software reboots i hear the ip address being announced.
> 
> but no throughput of audio. I set duplex setting to 3 in the setup.
> 
> can anyone advise please
> 
> thanks