[arm-allstar] Problems after system update
Doug Crompton
wa3dsp at gmail.com
Sat Feb 10 02:20:07 EST 2018
Jim,
I just sent out a fix on this to arm-allstar. The problem was that early
DNS instructions conflicted with a change we made in a file. Follow the
instruction in the email and you should be good.
Doug
On Thu, Feb 8, 2018 at 12:56 AM, "James R. Pilgram via arm-allstar" <
arm-allstar at hamvoip.org> wrote:
> I experienced the same issue with the IP announcement not working as you
> did. This was a new install. On first boot it announced my IP address but
> after the update and reboot it no longer announced the IP address. I had
> to enable that *A1 functions to get the IP address. Never put the 2
> together till you pointed it out.
>
> Jim NH6HI
>
> *From:* arm-allstar at hamvoip.org
> *Sent:* February 7, 2018 19:14
> *To:* arm-allstar at hamvoip.org
> *Reply-to:* arm-allstar at hamvoip.org
> *Cc:* csouleles at prodigy.net
> *Subject:* [arm-allstar] Problems after system update
>
> I just did a system update today (2/7/2018) using PUTTY selecting item 1
> on the Admin menu. Right after the update a couple things happened that I
> can't figure out.
>
> 1. My node no longer announces the IP address on start up. If I do *A1 it
> will announce the IP address, but before the update it would automatically
> announce it at start up. It no longer does that.
>
> 2. My halt button on the Raspberry PI3 no longer functions. Before the
> update it would halt the RPI3 if I held the button in for six seconds or
> so. It would announce goodbye system powering down. Now the button does
> not halt the processor. If I do system power down (item 16 on the Admin
> menu) the processor will halt and then I power it off. I checked
> /usr/local/etc/allstar.env and SHUTDOWN_MONITOR is enabled.
>
> My node is RPI3, DMK URi, Baofeng UV-82.
>
> Any ideas on what I should check? Thanks, Chris, W6CS - 73.
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20180210/15328097/attachment-0001.html>
More information about the arm-allstar
mailing list