[arm-allstar] K0HYT Remote base

m at palmers-family.com m at palmers-family.com
Sat Dec 29 18:36:37 EST 2018


Thank you Doug your help is always appreciated. I got migrated over and
got hamlib working. Do you have a example of using the autopatch to send
the commands. I do not quiet understand that part. EX like *5 520 would
dial to 146520000 FM. (Sorry I'm a visual learner.) 

73 and thanks again! 

On 2018-12-29 11:30, "Doug Crompton via ARM-allstar" wrote:

> Remote base software internal to Allstar will be removed from hamvoip code
> in the near future, This is buggy and at this point unsupported code. We
> announced this last summer and again several times since then so anyone
> using the internal remote base code to control a radio should be aware of
> this.
> 
> We suggest you use hamlib which is built-in to the hamvoip code. You can
> use the "autopatch" interface for now to access it with scripts. See the
> howto at hamvoip.org
> 
> hamlib supports many rigs and ham devices via the USB port (and serial with
> a USB to serial converter)
> 
> At the Linux prompt type -
> 
> rigctl -l
> 
> for supported rigs and
> 
> rigctl -h
> 
> For the commands. These commands can be issued at the Linux prompt and of
> course issues via a script and interfaced to Allstar via the "autopatch"
> interface as described in the howto. In the near future we will have a
> specific interface for this when the internal remote base code is removed.
> 
> This is quite a bit of online help for hamlib but if you have more
> questions please ask.
> 
> *73 Doug*
> 
> *WA3DSP*
> 
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> 
> On Sat, Dec 29, 2018 at 12:33 PM "K0HYT via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
>> Hello everyone. Hopefully I got the correct group this time. After a
>> couple years of playing with AllStar on RPI I have finally dove into my
>> remote base setup. I am using a Pi3 with a IC706MKIIG, Prolific USB
>> adapter (known working). When I add the radio=ic706 line and restart
>> Asterisk I notice the heartbeat led locks solid and asterisk crashes
>> when I connect to 1999. If I comment out that one line it works fine. I
>> have set permissions to /dev/USB0. Any ideas? I have attached a PDF with
>> my screenshots and node stanza.
>> 
>> Thanks in advance for any help.
>> 
>> Rpi 3 Arch
>> 
>> IC706MkIIG
>> 
>> Hamvoip V 1.4rc5-14
>> 
>> Asterisk
>> 1.3.23.pre.hamvoip-CV1.5.3-48-app_rpt-0.327-11_______________________________________________
>> 
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org


More information about the ARM-allstar mailing list