[arm-allstar] Android IAXRpt and supermon solution

[David McGough]

Mike,

For node 48656, your extensions.conf stanza should look like:

[android-iaxrpt]
exten => 48656,1,Answer                                           
exten => 48656,n,Playback,rpt/node
exten => 48656,n,Playback,digits/4
exten => 48656,n,Playback,digits/8
exten => 48656,n,Playback,digits/6
exten => 48656,n,Playback,digits/5  
exten => 48656,n,Playback,digits/6  
exten => 48656,n,Set(CALLERID(num)=0)
exten => 48656,n,Rpt,48656|P|${CALLERID(name)}


And, put your callsign, WM4B, in the CallerID blank in the Android IAXRPT 
account info on your phone.



73, David KB4FXC



On Fri, 31 Aug 2018, Mike Besemer wrote:

> Gents,
> 
> I'm still having issues getting this to work right. 
> 
> If my CallerID in IAXRPT is set to WM4B, what is the following line supposed
> to looked like?  Does WM4B replace the CALLERID or the name?  
> 
>  exten => 48656,n,Rpt,48656|P|${CALLERID(name)} ;;; The "CallerID" from
> IAXRpt"
> 
> Also, when I connect via IAXRPT, I hear an announcement saying it's
> connected to node 1998.  There is no '1998' anywhere in my extensions.conf
> or iax.conf.
> 
> Mike
> WM4B
> 
> -----Original Message-----
> From: ARM-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> "David McGough via ARM-allstar"
> Sent: Thursday, August 30, 2018 11:18 PM
> To: arm-allstar at hamvoip.org
> Cc: David McGough
> Subject: [arm-allstar] Android IAXRpt and supermon solution
> 
> 
> 
> Hi Everyone,
> 
> For those users with Android IAXRpt who can't get their connections to show
> up in Supermon or work properly, here is a solution. These changes are in
> Asterisk config files, only.
> 
> First, take a look at the attached screenshot from IAXRpt on my Android
> phone. These are the settings for one of the "Accounts." Note the Hostname,
> Username, Password, CallerID and Node settings.
> 
> The "Hostname" is the IP address / domain URL of the node you're trying to
> connect to.
> 
> Now, in the file /etc/asterisk/iax.conf:
> 
> [joe-bobs-account]		;;; The stanza is the "Username" from IAXRpt
> type=friend
> context=android-iaxrpt
> host=dynamic
> auth=md5
> secret=squirrelpower33		;;; The "Password" from IAXRpt
> disallow=all
> allow=ulaw
> transfer=no
> calltokenoptional=0.0.0.0/0.0.0.0
> requirecalltoken=no
> 
> 
> 
> And, the file /etc/asterisk/extensions.conf:
> 
> 
> [android-iaxrpt]                ;;; Stanza is the context from iax.conf
> exten => 1998,1,Answer		;;; The "Node" from IAXRpt is 1998
> exten => 1998,n,Playback,rpt/node
> exten => 1998,n,Playback,digits/1
> exten => 1998,n,Playback,digits/9
> exten => 1998,n,Playback,digits/9
> exten => 1998,n,Playback,digits/8
> exten => 1998,n,Set(CALLERID(num)=0)
> exten => 1998,n,Rpt,1998|P|${CALLERID(name)} ;;; The "CallerID" from IAXRpt
> 
> 
> 
> 
> .....So, with these stanzas, and the CallerID in IAXRpt set to "KB4FXC",
> Supermon will display the "NODE" as "KB4FXC"....
> 
> That's it...I'll check out Zoiper, etc., next.
> 
> 
> 73, David KB4FXC
> 
> 
> 
> 
>