[arm-allstar] DTMF issues...

[Vendel]

I raised the audio level a bit and I definitely didn’t hit any of the buttons more than once. It still does the same thing. Sometimes it decodes a different number on CLI. When I send the number from speed dial/ memory it works fine. I’ll keep adjusting the settings. Perhaps the tones are too short or long. Who knows? Take care, Vendel.

Sent from Mail for Windows 10

From: Doug Crompton via ARM-allstar 
Sent: Wednesday, August 29, 2018 10:32 PM
To: ARM Allstar
Cc: Doug Crompton
Subject: Re: [arm-allstar] DTMF issues...

Vendel,

  Also be sure to check your audio levels and try another radio and see if
it does the same thing. Setting voice levels does not guarantee DTMF levels
are correct. There is a pretty wide tolerance but it could be off enough to
cause a problem. Try adjusting your simpleusb-tune-menu item 2 level up or
down and see if that changes things.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Wed, Aug 29, 2018 at 10:19 PM "Vendel via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hi, it’s me again. So my low power basic repeater is up and running any
> very well I might add. When I dial a number using my Motorola GP300’s phone
> memory dialer whether it be an autopatch number or connecting to a node, it
> works without an issue. When I manually dial using the pad on the radio, I
> usually have a problem. When I run CLI, I show two of each number I press.
> Using the memory dialer, they print out just as they should. Any ideas on
> what’s going on. Thanks, Vendel/ K2DSI.
>
> [Aug 29 21:52:32] NOTICE[406]: chan_simpleusb.c:2689 simpleusb_read: Got
> DTMF char 1
> [Aug 29 21:52:32] NOTICE[406]: chan_simpleusb.c:2689 simpleusb_read: Got
> DTMF char 2
> [Aug 29 21:52:32] NOTICE[406]: chan_simpleusb.c:2689 simpleusb_read: Got
> DTMF char 2
> [Aug 29 21:52:33] NOTICE[406]: chan_simpleusb.c:2689 simpleusb_read: Got
> DTMF char 3
> [Aug 29 21:52:33] NOTICE[406]: chan_simpleusb.c:2689 simpleusb_read: Got
> DTMF char 3
> [Aug 29 21:52:33] NOTICE[406]: chan_simpleusb.c:2689 simpleusb_read: Got
> DTMF char 4
> [Aug 29 21:52:33] NOTICE[406]: chan_simpleusb.c:2689 simpleusb_read: Got
> DTMF char 4
>
> Dialing 1234.
>
> Sent from Mail for Windows 10
>
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org