[arm-allstar] Hamvoip x86?

[Paul KC8BDK]

Doug

Add me to the list too please...



On Fri, Aug 24, 2018, 6:31 PM "Alberto Enrique Puig via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hi Doug and the group,
>
>
> I have an available x86 HP-5730 Thin Client terminal PC if you need to
> beta test this new code.
>
>
> Regards,
>
>
> 73' Alberto KP4AP
>
>
> ________________________________
> From: arm-allstar <arm-allstar-bounces at hamvoip.org> on behalf of "Doug
> Crompton via arm-allstar" <arm-allstar at hamvoip.org>
> Sent: Friday, August 24, 2018 5:54 PM
> To: ARM Allstar
> Cc: Doug Crompton
> Subject: Re: [arm-allstar] Hamvoip x86?
>
> A PC version of the hamvoip V1.5 code is in alpha now will be released
> sometime after the registration server is in place. We will be setting up a
> separate email list for that in the same way we did for IRLP. Also like the
> IRLP release we will be adding users who would like to do initial beta
> testing. So if you would like to be added to the list let us know. Also
> please keep in mind there is absolutely no reason to run a PC version
> unless you are in a position where you have to. The Pi, especially the 3B+
> can handle just about anything you would throw at it. The real limitation
> now is the SW not the HW. Also 99% of users would never hit any
> limitations.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> WA3DSP Amateur Radio Resources - Crompton<http://www.crompton.com/hamradio
> >
> www.crompton.com
> Off the Air Audio clips. Audio in browsers varies greatly. One of the
> methods below (wav, wma, or mp3) should work in late edition Firefox and
> Explorer browsers.
>
>
>
>
> On Fri, Aug 24, 2018 at 5:34 PM "Danny K5CG via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > +1 from me.
> >
> > I'd like to build an x86 Hamvoip VM to replace a hub.
> >
> > ----- Original Message -----
> > From: "ARM Allstar" <arm-allstar at hamvoip.org>
> > To: "ARM Allstar" <arm-allstar at hamvoip.org>
> > Cc: "Tom Hayward" <tom at tomh.us>
> > Sent: Friday, August 24, 2018 3:11:14 PM
> > Subject: [arm-allstar] Hamvoip x86?
> >
> > What's the status on an x86 build of hamvoip? I'd like to use the new
> > private groups feature of DNS lookup on a hub that links a bunch of
> private
> > nodes, but the hub is in a data center and not running on an RPi. Is
> there
> > any way to use this feature on my hub?
> >
> > Tom KD7LXL
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>