[arm-allstar] Simplex node to Allstar Repeater

[Doug Crompton]

Vendel,

  That's very easy. First split the lines from the FOB.  TX audio, PTT, and
ground go to the transmitter and RX audio, COS, and ground go to the
receiver of the repeater. Then in /etc/asterisk/rpt.conf change duplex=1
to duplex=2 in the node parameters. Of course there are other
customizations you can make but doing just that will be all you need to get
it going.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sun, Aug 19, 2018 at 8:18 AM, "Vendel via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hello all. Yet another question. I’m currently running a simplex node and
> it’s running great. How do I change it to an Allstar Repeater Node without
> starting at square one with a fresh install? I’m currently running the RIM
> Maxtrac Lite interface and I’ll be switching to the RIM Maxtrac Lite RM.
> Thanks for the past help and I’ll try not to be too much of a pest in the
> future, Vendel/ K2DSI.
>
> Sent from Mail for Windows 10
>
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org