[arm-allstar] APRS

Luc Drolet VE2LUQ ldrolet at cgocable.ca
Sat Aug 18 19:24:36 EDT 2018


Hello David,

I do not have GPS to install on my raspberry PI
I want to give my coordinates via my raspberry PI
private node
do I still have to say load = app_gps.so?

it is me who will give the possition longitude and latitude in asterisk

Thank you

> Le 18 août 2018 à 19:03, David McGough via arm-allstar <arm-allstar at hamvoip.org> a écrit :
> 
> 
> 
> Luc,
> 
> There is a noload=app_gps.so in the list of modules. It must be changed to 
> load= or commented out.
> 
> noload=app_flash.so
> noload=app_page.so
> noload=app_gps.so    <<<<---- change to load=
> noload=pbx_dundi.so
> noload=app_setcallerid.so
> noload=app_dictate.so
> 
> And, restart asterisk with:
> 
> astdn.sh
> astup.sh
> 
> ...Or, use the admin menu option #13 to restart asterisk.
> 
> 
> 73, David KB4FXC
> 
> 
> On Sat, 18 Aug 2018, "Luc Drolet VE2LUQ via arm-allstar" wrote:
> 
>> Hello to you ,
> 
> I use a private node
> for your information, I do not know if it's important
> 
> Yes I disconnect the 5 volts and reconnect after 5 seconds
> 
> Thank you for your help
> Luc
> 
> 
>> Le 18 août 2018 à 18:39, Luc Drolet VE2LUQ via arm-allstar <arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>> a écrit :
>> 
>> Hello James,
>> 
>> I put
>> 
>> load = app_gps.so
>> [global]
>> 
>> and I waited 15 minutes to be sure to see on the web page aprs.fi <http://aprs.fi/> if I can see the repeater
>> and nothing is displayed
>> 
>> Luc
>> VE2LUQ
>> 
>>> Le 18 août 2018 à 18:10, James Hause via arm-allstar <arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>> a écrit :
>>> 
>>> I think I see your problem.  You need to change   in MODULES.CONF "noload =
>>> app_gps.so",
>>> to load=app.gps.so.   Having the noload tells it no NOT load, you want it
>>> to load.
>>> 
>>> On Sat, Aug 18, 2018 at 4:21 PM, "Luc Drolet VE2LUQ via arm-allstar" <
>>> arm-allstar at hamvoip.org> wrote:
>>> 
>>>> Hello to you,
>>>> 
>>>> With asterisk I think we can have a tag placed on the APRS.FI site of the
>>>> repeater position
>>>> I added the file using the ssh mode of the raspberry PI
>>>> 
>>>> and I can not see my position on the APRS.FI website
>>>> in addition I also put in MODULES.CONF "noload = app_gps.so"
>>>> 
>>>> ;——————————
>>>> ; Configuration for app_gps
>>>> ;
>>>> [general]
>>>> 
>>>> call = ve2luq; callsign (including SSID) for APRS purposes
>>>> password = xxxxxxxxxxxx; Password for APRS-IS server
>>>> comment = AllStar Node 1400; Text to be displayed with this station
>>>> server = rotate.aprs2.net; APRS-IS server to report information
>>>> port = 14580; port on server to send data
>>>> interval = 600; Beacon interval in seconds
>>>> icon = r; A CAR (default) Icon for the APRS display (see below)
>>>> comport = / dev / ttyS0; Serial port for GPS receiver
>>>> baudrate = 4800; Baud rate for GPS receiver
>>>> debug = y; set this for debug output
>>>> freq = 145.130; Display Frequency of station
>>>> tone = 100.0; CTCSS tone of station (0.0 for none)
>>>> lat = 46.1344359; Fixed latitude in decimal degrees
>>>> lon = -71.2263340; Fixed (default) longitude in decimal degrees
>>>> elev = 123.4; Elevation of Antenna in Meters (* NOT * HAAT)
>>>> power = 1; Power level (see below)
>>>> height = 2; Antenna Height in HAAT (see below)
>>>> gain = 3; Antenna Gain (see below)
>>>> dir = 0; Antenna Direction (see below)
>>>> ;--------------------------
>>>> 
>>>> 
>>>> I can not see where my mistake is
>>>> I think it must work to see our position of our repeaters on the APRS.FI
>>>> website
>>>> 
>>>> Thank you and have a nice evening to you all
>>>> 
>>>> Luc
>>>> VE2LUQ
>>>> _______________________________________________
>>>> 
>>>> arm-allstar mailing list
>>>> arm-allstar at hamvoip.org
>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>> 
>>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>> _______________________________________________
>>> 
>>> arm-allstar mailing list
>>> arm-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>> 
>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> 
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar <http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar>
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org <http://hamvoip.org/>


More information about the arm-allstar mailing list