[arm-allstar] APRS

[James Hause]

Below is my gps.conf file Note lines in Red are commented out on mine.
Hope this helps.
; Configuration for app_gps
;
[general]
call = KF5LBT-5 ; callsign (including SSID) for APRS purposes
password = XXXXX ; Password for APRS-IS server for above callsign
comment = AllStar Node 46738 ; Text to be displayed associated with this
station
server = rotate.aprs2.net ; APRS-IS server to report information to
port = 14580 ; port on server to send data
interval = 600 ; Beacon interval in seconds
icon = r ; Antenna Icon do be displayed for station on APRS display
;comport = /dev/ttyS0 ; Serial port for GPS receiver (specify this only if
using GPS receiver) Commented out
;baudrate = 4800 ; Baud rate for GPS receiver (specify this only if using
GPS receiver) Commented out
;debug = y ; set this for debug output Commented out
freq=147.465 ; Display Frequency of station
tone=0.0 ; CTCSS tone of station (0.0 for none)
lat=32.91425 ; Fixed (default) latitude in decimal degrees
lon=-97.11686 ; Fixed (default) longitude in decimal degrees
elev=180 ; Elevation of Antenna in Meters (*NOT* HAAT)
power=0 ; Power level (see below)
height=4 ; Antenna Height in HAAT (see below)
gain=3 ; Antenna Gain (see below)
dir=0 ; Antenna Direction (see below) Omni is 0


For Modules:

In the same /etc/asterisk directory, type nano modules.conf
Scroll down 59 lines until you find:
noload => app_gps.so ; GPS interface module
Then simply delete the letters "no" so it looks like:
load => app_gps.so ; GPS interface module
Ctrl-x to save and exit.

On Sat, Aug 18, 2018 at 5:39 PM, "Luc Drolet VE2LUQ via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hello James,
>
> I put
>
> load = app_gps.so
> [global]
>
> and I waited 15 minutes to be sure to see on the web page aprs.fi if I
> can see the repeater
> and nothing is displayed
>
> Luc
> VE2LUQ
>
> > Le 18 août 2018 à 18:10, James Hause via arm-allstar <
> arm-allstar at hamvoip.org> a écrit :
> >
> > I think I see your problem.  You need to change   in MODULES.CONF
> "noload =
> > app_gps.so",
> > to load=app.gps.so.   Having the noload tells it no NOT load, you want
> it
> > to load.
> >
> > On Sat, Aug 18, 2018 at 4:21 PM, "Luc Drolet VE2LUQ via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> >> Hello to you,
> >>
> >> With asterisk I think we can have a tag placed on the APRS.FI site of
> the
> >> repeater position
> >> I added the file using the ssh mode of the raspberry PI
> >>
> >> and I can not see my position on the APRS.FI website
> >> in addition I also put in MODULES.CONF "noload = app_gps.so"
> >>
> >> ;——————————
> >> ; Configuration for app_gps
> >> ;
> >> [general]
> >>
> >> call = ve2luq; callsign (including SSID) for APRS purposes
> >> password = xxxxxxxxxxxx; Password for APRS-IS server
> >> comment = AllStar Node 1400; Text to be displayed with this station
> >> server = rotate.aprs2.net; APRS-IS server to report information
> >> port = 14580; port on server to send data
> >> interval = 600; Beacon interval in seconds
> >> icon = r; A CAR (default) Icon for the APRS display (see below)
> >> comport = / dev / ttyS0; Serial port for GPS receiver
> >> baudrate = 4800; Baud rate for GPS receiver
> >> debug = y; set this for debug output
> >> freq = 145.130; Display Frequency of station
> >> tone = 100.0; CTCSS tone of station (0.0 for none)
> >> lat = 46.1344359; Fixed latitude in decimal degrees
> >> lon = -71.2263340; Fixed (default) longitude in decimal degrees
> >> elev = 123.4; Elevation of Antenna in Meters (* NOT * HAAT)
> >> power = 1; Power level (see below)
> >> height = 2; Antenna Height in HAAT (see below)
> >> gain = 3; Antenna Gain (see below)
> >> dir = 0; Antenna Direction (see below)
> >> ;--------------------------
> >>
> >>
> >> I can not see where my mistake is
> >> I think it must work to see our position of our repeaters on the
> APRS.FI
> >> website
> >>
> >> Thank you and have a nice evening to you all
> >>
> >> Luc
> >> VE2LUQ
> >> _______________________________________________
> >>
> >> arm-allstar mailing list
> >> arm-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org