[arm-allstar] Tailmassagelist

[Doug Crompton]

Luc,

tailmessage is localplay. It plays only on the node it is installed in on
the RF (radio) side. If you have other nodes on that server or other
servers that you want to play the message on then you need to setup the
tailmessage on each node. Each node stanza can have a tialmessage command.
They could share the same files on the same server.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Fri, Aug 10, 2018 at 6:03 PM, "Luc Drolet VE2LUQ via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hello everyone,
>
> As a follow-up to yesterday's message, I am told that the message only
> plays on the repeater or is placed my MSG1.WAV
> the other repeater he does not hear the message
> is there a way for this pre-recorded voice message to play on all
> repeaters?
>
> I'm currently using tailmassagelist = / etc / asterisk / local / msg1
>
> and I want to get message played on the other repeaters that are related
> to this repeater
>
> Thank you for your help greatly appreciate
>
> 73’s
> Luc
> VE2LUQ
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org