[arm-allstar] IAXRPT

[Travis French]

Good Morning All,

While reading through some of the discussions on IAXRPT, I have a question that I did not see answered unless I missed it.

When using IAXRPT for Android, is it the "|P" or "|Pv" etc. that controls how the client side PTT function from the host side? I understand the advantage of VOX but is it possible to make the PTT in IAXRPT truly PTT with no VOX in lieu of the PTT toggle? What I am envisioning is that the software PTT button would have to be held while talking eliminating the possibility of inadvertently keying up. My only thought might be that a long key press in Android might initiate another function. I am not sure.

Does anyone one else have their IAXRPT set up this way with true PTT?

Thank you in advance, 73

Travis E. French - K2PCB



-----Original Message-----
From: arm-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "ka5tkn--- via arm-allstar"
Sent: Friday, August 03, 2018 5:13 PM
To: ARM Allstar <arm-allstar at hamvoip.org>
Cc: ka5tkn at suddenlink.Net
Subject: Re: [arm-allstar] IAXRPT

ohjoy ojoy, thanks Bryan, I have messed  withthis for 3 days, over looked it a xillion times.thanks again..glenn k5cod


Sent via the Samsung Galaxy Note5, an AT&T 4G LTE smartphone
-------- Original message --------From: Bryan St Clair via arm-allstar <arm-allstar at hamvoip.org> Date: 8/3/18  3:16 PM  (GMT-06:00) To: ARM Allstar <arm-allstar at hamvoip.org> Cc: Bryan St Clair <bryan at k6cbr.us> Subject: Re: [arm-allstar] IAXRPT I think you should be looking at the [myphone] context in extensions.conf not the [phone-iaxrpt].

[myphone]
exten=43991,1,rpt(43991|P)
exten=47036,1,rpt(47036|P)

Above is what my extensions.conf looks like.  If you added phone-iaxrpt, you need to point to it on your config inside iax.conf. Your example shows it linked to context=myphone

(I'm not Doug, so more may be wrong, but I think this will help.)

Bryan
Just a guy trying to help.  :)


On Fri, Aug 3, 2018 at 1:07 PM, "Glenn via arm-allstar" < arm-allstar at hamvoip.org> wrote:

> Hi Doug
> thanks for all the help so far...I got Supermon working on all 
> computers on my LAN....also got Windows iaxrpt working.
> My android iphone is one head case..The status says that it is 
> Registered but the node Node not connected..here are the\two files..
> iax.conf
> ; Iphone IAX connection
>
> [myiphone]
> username=myiphone
> type=friend
> context=myphone
> host=dynamic
> auth=md5
> ; add a passsword of your selection for secret secret=k5cod 
> disallow=all allow=ulaw
> allow=g726aal2
> allow=gsm
> codecpriority=host
> transfer=no
> ; add your call or your selection for callerid callerid=
>
> Extensions.conf
> ; Iphone example
>
> [phone-iaxrpt]
> exten=48541,1,Rpt 48541|P
> exten=1999,1,Rpt 1999|P
>
> I can't seem to find my problem
> thanks
> glenn  k5cod
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org




--
Bryan
K6CBR
bryan at k6cbr.us
Allstar Base: 43918, 43991
Allstar Hub: 43919, 47036
www.k6cbr.us
QRZ <http://www.qrz.com/db/K6CBR>
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org _______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org