[arm-allstar] Bindport Question

Mon Aug 6 01:00:49 EDT 2018

Bingo, you got it. Syntax is important and sometimes easy to miss. I missed
it!  I am sure that was the problem.

*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Sun, Aug 5, 2018 at 11:38 PM, "Benjamin Naber via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Something appears to be missing.
>
> in each node stanza, there are three nodes, two of the three are
> correct. The middle line for 48166 is missing something. It is missing
> a /
>
> so what has been copied is:
> > 48656 = radio at 127.0.0.1/48656,NONE
> > 48166 = radio at 192.168.1.201:4569,48166,NONE
> > 1999 = radio at 127.0.0.1/1999,NONE
>
>
> The line for 48166 should be:
> 48166 = radio at 192.168.1.201:4569/48166,NONE
>
>
> Benjamin, KB9LFZ
>
>
> On Sun, 2018-08-05 at 19:04 +0000,
> > Since your node 48656 is not using the default 4569,you must declare
> > port 4570 in your local path
> > 48656:
> > [nodes]
> > 48656 = radio at 127.0.0.1/48656,NONE
> > 48166 = radio at 192.168.1.201:4569,48166,NONE
> > 1999 = radio at 127.0.0.1/1999,NONE
> > Sould be:
> > 48656:
> > [nodes]
> > 48656 = radio at 127.0.0.1:4570/48656,NONE
> > 48166 = radio at 192.168.1.201:4569,48166,NONE
> > 1999 = radio at 127.0.0.1:4570/1999,NONE
> >
> > Roger
> >
> >       De : Mike Besemer via arm-allstar <arm-allstar at hamvoip.org>
> >  À : 'ARM Allstar' <arm-allstar at hamvoip.org>
> > Cc : Mike Besemer <mwbesemer at cox.net>
> >  Envoyé le : Dimanche 5 août 2018 14h37
> >  Objet : Re: [arm-allstar] Bindport Question
> >
> > Here's the entries from iax.conf:
> >
> > 48166:
> > [general]
> > bindport=4569
> > bindaddr=0.0.0.0
> >
> > 48656:
> > [general]
> > bindport=4570
> > bindaddr=0.0.0.0
> >
> > Everything seems to be working except I can't get both nodes to
> > connect to
> > each other.  I have the following entries in rpt.conf:
> >
> > 48166:
> > [nodes]
> > 48166 = radio at 127.0.0.1/48166,NONE
> > 48656 = radio at 192.168.1.202:4570,48656,NONE
> > 1999 = radio at 127.0.0.1/1999,NONE
> >
> > 48656:
> > [nodes]
> > 48656 = radio at 127.0.0.1/48656,NONE
> > 48166 = radio at 192.168.1.201:4569,48166,NONE
> > 1999 = radio at 127.0.0.1/1999,NONE
> >
> > Just wondering if these two things were related.
> >
> > Mike
> >
> >
> >
> > -----Original Message-----
> > From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf
> > Of
> > "Doug Crompton via arm-allstar"
> > Sent: Sunday, August 5, 2018 2:26 PM
> > To: ARM Allstar
> > Cc: Doug Crompton
> > Subject: Re: [arm-allstar] Bindport Question
> >
> > Mike,
> >
> > It looks OK here but keep in mind that you have the 166 node in
> > remote base
> > mode. Does it really need to be? If not turn it off at
> > allstarlink.org in
> > the node info. Recheck it is changed in iax.conf and correct for both
> > servers.
> >
> > # dns-query 48656
> > +OK|radio at 174.78.199.164:4570/48656,174.78.199.164
> >
> > # dns-query 48166
> > +OK|radio at 174.78.199.164:4569/48166,174.78.199.164,y
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> >
> > On Sun, Aug 5, 2018 at 2:02 PM, "Mike Besemer via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Just getting things set up on my second node and noticed something
> > > that
> >
> > has
> > > that has me puzzled.
> > >
> > > My nodes are running inside the same network, so the servers at
> > > allstarlink.org are set to different ports.
> > >
> > > 48166 = 4569
> > > 48656 =4570
> > >
> > > I have verified that this is correct both on the allstarlink server
> > > configuration page and in iax.conf
> > >
> > > lsnodes for 48166 reports correctly as follows:
> > > Host: 67.215.233.178:4569
> > > Node: 48166
> > > State: Registered
> > >
> > > What has me confused is that lsnodes for 48656 reports the SAME
> > > bindport
> >
> > as
> > > follows:
> > > Host: 67.215.233.178:4569
> > > Node: 48656
> > > State: Registered
> > >
> > > Seems like there was a thread about a similar question within the
> > > past
> >
> > week
> > > or so, but never saw the final answer.
> > >
> > > Mike
> > > WM4B
> > >
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> >
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org