[arm-allstar] Fwd: Bindport Question

Sun Aug 5 15:33:05 EDT 2018

NO,  you only have nodes listed in the extensions file for THAT server.
Remove the other one in each that you put in.

It should look like this -

48166:
[radio-secure]
exten => 48166,1,rpt,48166
exten => 1999,1,rpt,1999

48656:
[radio-secure]
exten => 48656,1,rpt,48656
exten => 1999,1,rpt,1999

On Sun, Aug 5, 2018 at 3:26 PM, Mike Besemer <mwbesemer at cox.net> wrote:

> Nope.  I was working from the "multi-server howto.pdf" at
> https://www.hamvoip.org/multi-server%20howto.pdf and didn't see any
> mention
> of extensions.conf in that document.
>
> Just tried adding an entry in each of the extensions.conf files:
>
> 48166:
> [radio-secure]
> exten => 48166,1,rpt,48166
> exten => 48656,1,rpt,48656
> exten => 1999,1,rpt,1999
>
> 48656:
> [radio-secure]
> exten => 48656,1,rpt,48656
> exten => 48166,1,rpt,48166
> exten => 1999,1,rpt,1999
>
> This didn't help, so my S.W.A.G didn't pay off.
>
> Mike
>
> -----Original Message-----
> From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> "Doug Crompton via arm-allstar"
> Sent: Sunday, August 5, 2018 3:13 PM
> To: ARM Allstar
> Cc: Doug Crompton
> Subject: [arm-allstar] Fwd: Bindport Question
>
> Mike,
>
>  The no such context extension means you do not have the extensions file
> setup correctly. It is not finding the node you are trying to connect to.
> Did you setup the extensions file for the new node?
>
> The [nodes] stanzas in rpt.conf look right. You have the corresponding
> ports in each.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Sun, Aug 5, 2018 at 3:05 PM, Mike Besemer <mwbesemer at cox.net> wrote:
>
> > Forgot to mention...  I get a 'Connection Failed' message.
> >
> >
> >
> > -----Original Message-----
> > From: Mike Besemer [mailto:mwbesemer at cox.net]
> > Sent: Sunday, August 5, 2018 3:04 PM
> > To: 'ARM Allstar'
> > Cc: 'Doug Crompton'
> > Subject: RE: [arm-allstar] Bindport Question
> >
> > Doug,
> >
> > Here are the output of the Asterisk CLI when I attempt to connect to
> 48166
> > from 48656:
> >
> >
> > 48656:
> >     -- Hungup 'DAHDI/pseudo-338008688'
> >     -- Hungup 'DAHDI/pseudo-1750936601'
> > [Aug  5 14:57:34] NOTICE[1689]: chan_simpleusb.c:2606 simpleusb_read: Got
> > DTMF char *
> >
> > [Aug  5 14:57:35] NOTICE[1689]: chan_simpleusb.c:2606 simpleusb_read: Got
> > DTMF char 3
> >
> > [Aug  5 14:57:36] NOTICE[1689]: chan_simpleusb.c:2606 simpleusb_read: Got
> > DTMF char 4
> >
> > [Aug  5 14:57:37] NOTICE[1689]: chan_simpleusb.c:2606 simpleusb_read: Got
> > DTMF char 8
> >
> > [Aug  5 14:57:37] NOTICE[1689]: chan_simpleusb.c:2606 simpleusb_read: Got
> > DTMF char 1
> >
> > [Aug  5 14:57:38] NOTICE[1689]: chan_simpleusb.c:2606 simpleusb_read: Got
> > DTMF char 6
> >
> > [Aug  5 14:57:39] NOTICE[1689]: chan_simpleusb.c:2606 simpleusb_read: Got
> > DTMF char6
> >
> > [Aug  5 14:57:39] WARNING[1680]: chan_iax2.c:9265 socket_process: Call
> > rejected by 192.168.1.201: No such context/extension
> >     -- Hungup 'IAX2/192.168.1.201:4569-4361'
> >     -- Hungup 'DAHDI/pseudo-709237076'
> >     -- Hungup 'DAHDI/pseudo-779848853'
> >     -- Hungup 'DAHDI/pseudo-1562690691'
> >     -- <DAHDI/pseudo-1876892524> Playing 'rpt/node' (language 'en')
> >     -- <DAHDI/pseudo-1876892524> Playing 'digits/4' (language 'en')
> >     -- <DAHDI/pseudo-1876892524> Playing 'digits/8' (language 'en')
> >     -- <DAHDI/pseudo-1876892524> Playing 'digits/1' (language 'en')
> >     -- <DAHDI/pseudo-1876892524> Playing 'digits/6' (language 'en')
> >     -- <DAHDI/pseudo-1876892524> Playing 'digits/6' (language 'en')
> >     -- <DAHDI/pseudo-1876892524> Playing 'rpt/connection_failed'
> (language
> > 'en')
> >     -- Hungup 'DAHDI/pseudo-1876892524'
> >
> >
> > 48166:
> > [Aug  5 14:57:39] NOTICE[10724]: chan_iax2.c:9087 socket_process:
> Rejected
> > connect attempt from 192.168.1.202, request 's at radio-secure' does not
> > exist
> >   == Refreshing DNS lookups.
> >
> > Mostly Greek to me, but looks like something is missing.
> >
> > Mike
> >
> > -----Original Message-----
> > From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> > "Doug Crompton via arm-allstar"
> > Sent: Sunday, August 5, 2018 2:44 PM
> > To: ARM Allstar
> > Cc: Doug Crompton
> > Subject: Re: [arm-allstar] Bindport Question
> >
> > Mike,
> >
> >  At first glance that looks OK. You need to open the asterisk client in a
> > window for each server and see what possible errors you get on each one
> > when you try to connect to the other. When you try to connect do you get
> a
> > connection failed? or just a beep? Give me some feedback on what you are
> > seeing if you don't get it going.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> >
> >
> > On Sun, Aug 5, 2018 at 2:35 PM, "Mike Besemer via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Here's the entries from iax.conf:
> > >
> > > 48166:
> > > [general]
> > > bindport=4569
> > > bindaddr=0.0.0.0
> > >
> > > 48656:
> > > [general]
> > > bindport=4570
> > > bindaddr=0.0.0.0
> > >
> > > Everything seems to be working except I can't get both nodes to connect
> > to
> > > each other.  I have the following entries in rpt.conf:
> > >
> > > 48166:
> > > [nodes]
> > > 48166 = radio at 127.0.0.1/48166,NONE
> > > 48656 = radio at 192.168.1.202:4570,48656,NONE
> > > 1999 = radio at 127.0.0.1/1999,NONE
> > >
> > > 48656:
> > > [nodes]
> > > 48656 = radio at 127.0.0.1/48656,NONE
> > > 48166 = radio at 192.168.1.201:4569,48166,NONE
> > > 1999 = radio at 127.0.0.1/1999,NONE
> > >
> > > Just wondering if these two things were related.
> > >
> > > Mike
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf
> Of
> > > "Doug Crompton via arm-allstar"
> > > Sent: Sunday, August 5, 2018 2:26 PM
> > > To: ARM Allstar
> > > Cc: Doug Crompton
> > > Subject: Re: [arm-allstar] Bindport Question
> > >
> > > Mike,
> > >
> > > It looks OK here but keep in mind that you have the 166 node in remote
> > base
> > > mode. Does it really need to be? If not turn it off at allstarlink.org
> > in
> > > the node info. Recheck it is changed in iax.conf and correct for both
> > > servers.
> > >
> > > # dns-query 48656
> > > +OK|radio at 174.78.199.164:4570/48656,174.78.199.164
> > >
> > > # dns-query 48166
> > > +OK|radio at 174.78.199.164:4569/48166,174.78.199.164,y
> > >
> > >
> > > *73 Doug*
> > >
> > > *WA3DSP*
> > >
> > > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> > >
> > >
> > > On Sun, Aug 5, 2018 at 2:02 PM, "Mike Besemer via arm-allstar" <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > > Just getting things set up on my second node and noticed something
> that
> > > has
> > > > that has me puzzled.
> > > >
> > > > My nodes are running inside the same network, so the servers at
> > > > allstarlink.org are set to different ports.
> > > >
> > > > 48166 = 4569
> > > > 48656 =4570
> > > >
> > > > I have verified that this is correct both on the allstarlink server
> > > > configuration page and in iax.conf
> > > >
> > > > lsnodes for 48166 reports correctly as follows:
> > > > Host: 67.215.233.178:4569
> > > > Node: 48166
> > > > State: Registered
> > > >
> > > > What has me confused is that lsnodes for 48656 reports the SAME
> > bindport
> > > as
> > > > follows:
> > > > Host: 67.215.233.178:4569
> > > > Node: 48656
> > > > State: Registered
> > > >
> > > > Seems like there was a thread about a similar question within the
> past
> > > week
> > > > or so, but never saw the final answer.
> > > >
> > > > Mike
> > > > WM4B
> > > >
> > > > _______________________________________________
> > > >
> > > > arm-allstar mailing list
> > > > arm-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > >
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>