[arm-allstar] Bindport Question

[Doug Crompton]

Mike,

It looks OK here but keep in mind that you have the 166 node in remote base
mode. Does it really need to be? If not turn it off at allstarlink.org in
the node info. Recheck it is changed in iax.conf and correct for both
servers.

# dns-query 48656
+OK|radio at 174.78.199.164:4570/48656,174.78.199.164

# dns-query 48166
+OK|radio at 174.78.199.164:4569/48166,174.78.199.164,y


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sun, Aug 5, 2018 at 2:02 PM, "Mike Besemer via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Just getting things set up on my second node and noticed something that has
> that has me puzzled.
>
> My nodes are running inside the same network, so the servers at
> allstarlink.org are set to different ports.
>
> 48166 = 4569
> 48656 =4570
>
> I have verified that this is correct both on the allstarlink server
> configuration page and in iax.conf
>
> lsnodes for 48166 reports correctly as follows:
> Host: 67.215.233.178:4569
> Node: 48166
> State: Registered
>
> What has me confused is that lsnodes for 48656 reports the SAME bindport as
> follows:
> Host: 67.215.233.178:4569
> Node: 48656
> State: Registered
>
> Seems like there was a thread about a similar question within the past week
> or so, but never saw the final answer.
>
> Mike
> WM4B
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>